Hello,
I am using AD 1938 for getting the audio data to be processed by ADSP
21364,
is it possible to configure AD1938 at 44.1KHz sampling rate and still
communicate with the ADSP 21364.
With Best Regards,
Saju.
AD1938-ADSP 21364 interface.....
Started by ●January 3, 2008
Reply by ●January 3, 20082008-01-03
Yes,
We interface as many as 4 AD1938s with our dspstak c192k48 cards. If
you have having trouble, it may be due to the DMA errata of the 21364.
We recommend ADSP-21369 or ADSP-21371 to our customers. You should
also have small resistors (22-33 ohm) in series with each line on the
driving side of the connection.
Al Clark
Danville Signal Processing, Inc.
cee4max wrote:
>
> Hello,
>
> I am using AD 1938 for getting the audio data to be processed by ADSP
> 21364,
> is it possible to configure AD1938 at 44.1KHz sampling rate and still
> communicate with the ADSP 21364.
>
> With Best Regards,
> Saju.
>
>
We interface as many as 4 AD1938s with our dspstak c192k48 cards. If
you have having trouble, it may be due to the DMA errata of the 21364.
We recommend ADSP-21369 or ADSP-21371 to our customers. You should
also have small resistors (22-33 ohm) in series with each line on the
driving side of the connection.
Al Clark
Danville Signal Processing, Inc.
cee4max wrote:
>
> Hello,
>
> I am using AD 1938 for getting the audio data to be processed by ADSP
> 21364,
> is it possible to configure AD1938 at 44.1KHz sampling rate and still
> communicate with the ADSP 21364.
>
> With Best Regards,
> Saju.
>
>
