you need to use the ELF2EXE converter program
supplied with VisualDSP. The executable is now ELF/DWARF format and needs to be
converted for the older EZ-KIT lite 2181 boards.
Pete
----- Original Message -----
From: Jaime Andres Aranguren Cardona
To: a...@yahoogroups.com
Sent: Wednesday, June 20, 2001 6:15 PM
Subject: [adsp] 2181 <-> VDSP++2.0
Hi everybody
Does somebody know how to download the DSP executable file from VDSP++2.0 to
the 21XX EzKit Lite, to RUN it, not just for debugging?
Note: If you do a simple "reply" with your email client, only the
author of this message will receive your answer. You need to do a "reply
all" if you want your answer to be distributed to the entire group.
_____________________________________ About this discussion group:
Reply by Jaime Andres Aranguren Cardona●June 21, 20012001-06-21
Thanks a lot for the info.
Still have a question: should I use the old loader that came with he original
EzLite Software?
Best regards
TRL Performance <p...@trlperformance.com> wrote:
you need to use the ELF2EXE converter program
supplied with VisualDSP. The executable is now ELF/DWARF format and needs to be
converted for the older EZ-KIT lite 2181 boards.
Pete
----- Original Message -----
From: Jaime Andres Aranguren Cardona
To: a...@yahoogroups.com
Sent: Wednesday, June 20, 2001 6:15 PM
Subject: [adsp] 2181 <-> VDSP++2.0
Hi everybody
Does somebody know how to download the DSP executable file from VDSP++2.0 to
the 21XX EzKit Lite, to RUN it, not just for debugging?
Note: If you do a simple "reply" with your email client, only the
author of this message will receive your answer. You need to do a "reply
all" if you want your answer to be distributed to the entire group.
_____________________________________ About this discussion group:
Reply by Keld Hammerum Andersen●June 22, 20012001-06-22
Reg. ELF2EXE program
Be sure to download the latest version of the program from Analog Devices.
There exists an older version of ELF2EXE.EXE from Analog Devices that
doesn´t
work! Regarding the loader program, there are a few alternative, command-line
based download programs available on the ADSP web-site. These tend to be
a little faster than the original EZ-KIT Lite host program supplied with
the old 2181 kit.
Regards
Keld Hammerum Andersen
SW Engineer, Ekko Dane A/S
Denmark
Jaime Andres Aranguren Cardona wrote:
Hi everybody
Does somebody know how to download the DSP executable file from VDSP++2.0
to the 21XX EzKit Lite, to RUN it, not just for debugging?
Note: If you do a simple "reply" with your email
client, only the
author of this message will receive your answer. You need to do a
"reply all" if you want your answer to be distributed to the entire group.
_____________________________________ About this discussion group:
>Still have a question: should I use the old loader that came with he
original EzLite Software?
Yes. Once converted to the new format use all
the old monitor tools as before. All you've done is changed the
compiler/linker tools. The monitor ROM on the EZ-KIT lite and the other tools
will still work fine.
I've since upgraded to a 2189 EZ-KIT Lite
and use VisualDSP directly so this is going from memory about 4 months
ago.