Hi all,
I m working on texas dsp TMS320F2810 . We are connecting Texas dsp and Arm 73 ic
through can .
Now i m facing problem such that From dsp side data gets transmitted. but i m
not able to recevice data from ARm side.
i m using spra876a.zip from this using RXLOOP.c program and can clock set to
50khz. from both side.
Plz. help me to solve this problem
Thanks in advance.
Can receive not working for texas 2810 dsp
Started by ●December 7, 2007
Reply by ●December 10, 20072007-12-10
hello,
I have some similar queries like you. I m using TI 2808 processor and using the same example code like you from TI. I too feel my CAN get proper initialization and data gets transmitted but I want to know how did u get confirmed that this happens. I mean did u chek your messege data via oscilloscope on Tx pin of the CAN? or some thing else.Also one more thing i m able to get my code of Self Test mode working proper , I also view the mailbox transfer via debug tool.
Please write me back .I m also facing problems receiving.
Saurabh Parmar
Edutech Systems ,Vadodara
Hi all,
>
>I m working on texas dsp TMS320F2810 . We are connecting Texas dsp and Arm 73 ic through can .
>Now i m facing problem such that From dsp side data gets transmitted. but i m not able to recevice data from ARm side.
>i m using spra876a.zip from this using RXLOOP.c program and can clock set to 50khz. from both side.
>
>Plz. help me to solve this problem
>
>Thanks in advance.
>
I have some similar queries like you. I m using TI 2808 processor and using the same example code like you from TI. I too feel my CAN get proper initialization and data gets transmitted but I want to know how did u get confirmed that this happens. I mean did u chek your messege data via oscilloscope on Tx pin of the CAN? or some thing else.Also one more thing i m able to get my code of Self Test mode working proper , I also view the mailbox transfer via debug tool.
Please write me back .I m also facing problems receiving.
Saurabh Parmar
Edutech Systems ,Vadodara
Hi all,
>
>I m working on texas dsp TMS320F2810 . We are connecting Texas dsp and Arm 73 ic through can .
>Now i m facing problem such that From dsp side data gets transmitted. but i m not able to recevice data from ARm side.
>i m using spra876a.zip from this using RXLOOP.c program and can clock set to 50khz. from both side.
>
>Plz. help me to solve this problem
>
>Thanks in advance.
>