DSPRelated.com
Forums

Urgent: Help for selecting DSK

Started by slweasel2002 October 25, 2002

Hi,

I am torn in between buying the 5402 or the 5416 DSK. The 5402 has an
extra UART port, where as the 5416 talks over the USB.

How stable are the windows drivers for these platforms and is there a
time limit to the tools provided?

Larry
Vancouver, BC
Canada




Larry,

I have both DSKs, and I would definately go with the 5416.
I actually beta tested the 5416, and found the USB interface to
be much more reliable than the parallel port interface of the
5402 DSK. If you really need the UART port, I would find a way
to build your own UART daughter board for the 5416. You could use
the TI TLC16C550CFN IC, which is the chip that is used on the 5402 DSK.

Hope this helps.

Tony
______________________________
Tony Zampini ()
Director of Engineering
DSP Global Inc.
33 Plan Way, Bldg. #4
Warwick, RI 02886
Tel. 401-737-9900
FAX: 401-739-4197
www.dspglobal.com

----- Original Message -----
From: "slweasel2002" <>
To: <>
Sent: Friday, October 25, 2002 1:04 PM
Subject: [c54x] Urgent: Help for selecting DSK >
> Hi,
>
> I am torn in between buying the 5402 or the 5416 DSK. The 5402 has an
> extra UART port, where as the 5416 talks over the USB.
>
> How stable are the windows drivers for these platforms and is there a
> time limit to the tools provided?
>
> Larry
> Vancouver, BC
> Canada >
>
> _____________________________________
> Note: If you do a simple "reply" with your email client, only the author
of this message will receive your answer. You need to do a "reply all" if
you want your answer to be distributed to the entire group.
>
> _____________________________________
> About this discussion group:
>
> To Join: Send an email to
>
> To Post: Send an email to
>
> To Leave: Send an email to
>
> Archives: http://www.yahoogroups.com/group/c54x
>
> Other Groups: http://www.dsprelated.com > ">http://docs.yahoo.com/info/terms/ >