|
Hi all, I am using a XDS510 PP+ Emulator on a DSK5416. I find that the transmit speed from target to host is very slow. It's about 3KB/s. I have tried EPP parallel port mode. But I can't get a higher speed. Can anyone give me some suggestion please? Thanks a lot!! |
|
|
Question on JTAG transmit speed
Started by ●June 12, 2003
Reply by ●June 12, 20032003-06-12
|
3 KB/sec on the XDS510PP+ sounds painfully slow! Maybe your JTAG clock runs too slow. Check it - it should be at least 1 MHz. We have tried the JTAGjet emulator (form Signum Systems) on the DSK5416 and got 100 Kbytes/sec running with CCS 2.10 and 135 KB/sec with the Chameleon C5000 Debugger. Jerry ----- Original Message ----- From: "yuanmeng61" <> To: <> Sent: Wednesday, June 11, 2003 11:02 PM Subject: [c54x] Question on JTAG transmit speed > Hi all, > > I am using a XDS510 PP+ Emulator on a DSK5416. I find that the > transmit speed from target to host is very slow. It's about 3KB/s. I > have tried EPP parallel port mode. But I can't get a higher speed. > Can anyone give me some suggestion please? Thanks a lot!! > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://www.yahoogroups.com/group/c54x > > Other Groups: http://www.dsprelated.com > ">http://docs.yahoo.com/info/terms/ > > |
