|
Hi People
Just wondering if anybody knows if the 'C5410 is
capable of bootloading from a serial EEPROM device. I know the 'C5402
has this capability, and has an SPI compatable 4-wire interface. I need to
know if the 'C5402 is also abe to do this.
Many thanks,
Tim Shearer
Digital Design Engineer BBM Electronics Group, Trantec Systems E-Mail: t...@trantec.co.uk, Web: www.trantec.co.uk Phone: +44 (0)20 8330 3388, Fax: +44 (0)20 8330 3222 |
|
|
c5410 bootloader
Started by ●October 17, 2000
Reply by ●October 17, 20002000-10-17
|
"tim.shearer" <> writes: > Just wondering if anybody knows if the 'C5410 is capable of > bootloading from a serial EEPROM device. See http://www-s.ti.com/sc/psheets/spra609a/spra609a.pdf > I know the 'C5402 has this capability, and has an SPI compatable > 4-wire interface. I need to know if the 'C5402 is also abe to do > this. No SPI at this point it seems, but McBSP1 is "reserved for a future serial boot mode". According to SPRA609 it sets up the serial port(s) "to a configuration consistent with the TI C54x standard serial port", whatever that means. The '5410 boot ROM source code, which is available somewhere on TI's web site, should provide more detailed info. Regards, --Daniel -- Daniel Neri mailto: Sigicom AB, Sweden http://www.sigicom.com |
