I am running XP Home Edition Service Pack 1 with CCS 2.1 and a C5402 DSK. I get the error saying it cant initialise through the parallel port and I have tried ECP, EPP and ECP+EPP mode on this. I have checked my jumper settings and they are correct according to various sources. Can anyone give me any help on trying to get the board working on my machine? Tim King |
|
C5402 DSK Windows XP
Started by ●July 22, 2003
Reply by ●July 24, 20032003-07-24
Typically the settings for the Parallel Port are controlled by the BIOS. Have you checked there? Carl Chipman Nomadics, Inc. http://www.nomadics.com -----Original Message----- From: blindf22 [mailto:] Sent: Monday, July 21, 2003 7:25 PM To: Subject: [c54x] C5402 DSK Windows XP I am running XP Home Edition Service Pack 1 with CCS 2.1 and a C5402 DSK. I get the error saying it cant initialise through the parallel port and I have tried ECP, EPP and ECP+EPP mode on this. I have checked my jumper settings and they are correct according to various sources. Can anyone give me any help on trying to get the board working on my machine? Tim King _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: Send an email to To Post: Send an email to To Leave: Send an email to Archives: http://www.yahoogroups.com/group/c54x Other Groups: http://www.dsprelated.com ">http://docs.yahoo.com/info/terms/ |