Forums

MP/MC VC5407 boot problem

Started by endy_dsp May 8, 2005
Hello,
I'm trying to boot program on vc5407 from serial flash memory.
Everything goes well except of the MP/MC bit in PMST register. It
should be changed during reset due to the MP/MC external pin. MP/MC
pin is low (connected to ground), but the bit is high all the time. I
can change it in CCS on my own while working with JTAG and then the
program is booting and everything goes well. But this is not my
purpose. Can anyone help me please?
Thanks
Maciek