Hello everybody,
I am working with TMS320C5416DSK. while working with the kit, i
was told to get the audio input from a CD player/Walkman or through mike. Is
there any other option to provide the audio file that is already stored in the
computer hard disk as input to the kit.
Thanks in advance.
Awaiting your suggestion.
Arul
stored audio input
Started by ●August 21, 2006
Reply by ●September 11, 20062006-09-11
Dear Arul,
To provide audio data from the computer, you can create a file ".h" in Matlab with the audio data that you have and include this file on the header of the code (as you include the libraries). Im used to transfer my theorycal data from Matlab to the kit on this manner.
I hope have helped you.
Guilherme
_____________________
Guilherme Martinhon
Electrical Engineer
Mastering en Electrical Engineering - Electronical Instrumentation
Ultrasound Laboratory
UNESP - Campus of Ilha Solteira
Brazil
To provide audio data from the computer, you can create a file ".h" in Matlab with the audio data that you have and include this file on the header of the code (as you include the libraries). Im used to transfer my theorycal data from Matlab to the kit on this manner.
I hope have helped you.
Guilherme
_____________________
Guilherme Martinhon
Electrical Engineer
Mastering en Electrical Engineering - Electronical Instrumentation
Ultrasound Laboratory
UNESP - Campus of Ilha Solteira
Brazil
