Hi all !
I'm doing some lab with C54CST board ,I have a program has been loaded into
C54CST board ( in flex mode ) and then I used a PC ( with hyper terminal and AT
command ) to call to C54CST . But I just can detect the ring signal when the PC
call .
Please tell me how to accept the ring ?
Thanks.
How to accept a phone !
Started by ●January 23, 2007
Reply by ●January 23, 20072007-01-23
Dinh Luan-
> I'm doing some lab with C54CST board ,I have a program has been loaded
> into C54CST board ( in flex mode ) and then I used a PC ( with hyper
> terminal and AT command ) to call to C54CST . But I just can detect
> the ring signal when the PC call .
> Please tell me how to accept the ring ?
Spirit DSP makes the C54CST board, you should check their website for FAQ and tech
support. For example maybe this page would help:
http://www.spiritdsp.com/cst/cstfaq_14.html
If the web pages don't help, then send questions to Spirit by e-mail. It's their
obligation to help customers who have their products.
-Jeff
> I'm doing some lab with C54CST board ,I have a program has been loaded
> into C54CST board ( in flex mode ) and then I used a PC ( with hyper
> terminal and AT command ) to call to C54CST . But I just can detect
> the ring signal when the PC call .
> Please tell me how to accept the ring ?
Spirit DSP makes the C54CST board, you should check their website for FAQ and tech
support. For example maybe this page would help:
http://www.spiritdsp.com/cst/cstfaq_14.html
If the web pages don't help, then send questions to Spirit by e-mail. It's their
obligation to help customers who have their products.
-Jeff