Hi,
Could someone please tell me what's wrong with my program ? There are no
error for this program but the switch doesn't work. Here is my program.
Thanks.
#include
#define GPIOCR (*(volatile unsigned int*)(0x3C))
#define GPIOCR_ADDR 0x3C
#define GPIOSR (*(volatile unsigned int*)(0x3D))
#define GPIOSR_ADDR 0x3D
void delay(void)
{
long i, j=0;
for(i=0;i<1000000;i++)
{
j++;
}
}
void main()
{
DSK5416_init();
DSK5416_LED_init();
DSK5416_DIP_init();
GPIOCR=0xff;
while(1)
{
if (DSK5416_DIP_get(1) == 1)
{
//================================================================================//DIP
switch 1 is on & motor move
GPIOSR=0x01;
delay();
GPIOSR=0x02;
delay();
GPIOSR=0x04;
delay();
GPIOSR=0x08;
delay();
}
else if (DSK5416_DIP_get(2) == 1)
{
//================================================================================//DIP
switch 2 is on & motor stop
GPIOSR=0x00;
}
else if (DSK5416_DIP_get(3) == 1)
{
//================================================================================//DIP
switch 3 is on & motor move to the right
GPIOSR=0x08;
delay();
GPIOSR=0x04;
delay();
GPIOSR=0x02;
delay();
GPIOSR=0x01;
delay();
DSK5416_LED_off(3);
}
else
{
(DSK5416_DIP_get(4) == 1);
//================================================================================//DIP
switch 4 is on & motor move to the left
GPIOSR=0x01;
delay();
GPIOSR=0x02;
delay();
GPIOSR=0x04;
delay();
GPIOSR=0x08;
delay();
DSK5416_LED_off(4);
}
}
}
Regards,
Dayah
Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video
Transcoding Solution for Commercial & Consumer End Equipment: www.ti.com/dm6467
Please help me- switch don't function
Started by ●March 5, 2008
Reply by ●March 6, 20082008-03-06
Dear dir
It may be because of different format of else if syntax in CCS for example try on "elsif" or other formats.
regards
Hi,
>
>Could someone please tell me what's wrong with my program ? There are no error for this program but the switch doesn't work. Here is my program. Thanks.
>
>#include
>#define GPIOCR (*(volatile unsigned int*)(0x3C))
>#define GPIOCR_ADDR 0x3C
>#define GPIOSR (*(volatile unsigned int*)(0x3D))
>#define GPIOSR_ADDR 0x3D
>
>void delay(void)
>{
>
> long i, j=0;
> for(i=0;i
Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video Transcoding Solution for Commercial & Consumer End Equipment: www.ti.com/dm6467
It may be because of different format of else if syntax in CCS for example try on "elsif" or other formats.
regards
Hi,
>
>Could someone please tell me what's wrong with my program ? There are no error for this program but the switch doesn't work. Here is my program. Thanks.
>
>#include
>#define GPIOCR (*(volatile unsigned int*)(0x3C))
>#define GPIOCR_ADDR 0x3C
>#define GPIOSR (*(volatile unsigned int*)(0x3D))
>#define GPIOSR_ADDR 0x3D
>
>void delay(void)
>{
>
> long i, j=0;
> for(i=0;i
Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video Transcoding Solution for Commercial & Consumer End Equipment: www.ti.com/dm6467
