Hi, DO any one faced some problem in updating the SDRAM interfaced to your target, In the CCS whenever it comes up. The SDRAM memory area is shown as oxffff. On calling my function to configure the SDRAM , the value display still remains same. SOme times on doing software reset. It does show proper values( ie able to see the SRAM contents) The clock I am running on 250 Mhz & the SDRAM runs on 125 Mhz. Please let me know if somebody faces a general problem on updating the SDRAM Regards Gagan |
SDRAm interface with 5510
Started by ●May 6, 2003