|
Hello, I just instealled CCS on my laptop's D drive for the C6711 DSK and was trying to follow the instructions on the Quick Start Guide SPRU436B on testing the DSK ports with Start -> Programs -> TI -> CCS -> C6x11 DSK Utilities -> Test C6x11 DSK Ports. However, a command window popped up with multiple listings of the following: "The system cannot find the path specified." I also have the same error message with Start -> Programs -> TI -> CCS -> C6x11 DSK Utilities -> Configure C6x11 DSK. Also if I tried to start CCS, I get a dialog box with this: Can't Initialize Target CPU: This is a TI USCIF adapter library [Sourceless EPK] error. POD_ERR_RESET <-700> Error detected during reset I/O Port = 378 Board Name: C6x11 DSK (TI) Cpu Name: CPU_1 Abort: Close CCS Retry: Try to initialize the targer again. Ignore: Ignore the initialize error and start without target debugging access. Can someone please tell me what's wrong? Thanks! |
C6711 DSK Test Failed!
Started by ●September 24, 2002
