tasks setting in DSP/BIOS-URGENT!!!!!

Hi

I am trying to figure out how to set up tasks in DSP/BIOS. My code is as below


#include
#include
#include
#include
#include
#include
#include
#include "lab1cfg.h"

Uns counts_per_us;
void our_task();
extern LOG_Obj trace;

/* ======== main ======== */
int main()
{
LOG_printf(&trace, "Slice example started!");
counts_per_us = CLK_countspms() / 1000;
SEM_post(&sem);
return;
}
void our_task()
{
while(1)
{
SEM_pend(&sem,SYS_FOREVER);
LOG_printf(&trace,"Called once \n");
SEM_pend(&sem,SYS_FOREVER);
LOG_printf(&trace,"called twice \n");
}
}


I opened to the cdb file and opened the TSK under Scheduling and inserted a task TSK0 and connected it to function _our_task and 0 arguments and priority 1. Now when i compile this code it says it cannot link this function... What am i doing wrong... This is urgent... can you please help me in compling this code.....

Start a New Thread

balasubramanian,

There is absolutely no reason to be calling any of the semaphore functions in
this file.

If the code is trying to wait for a while, then use sleep()

Also, the 'sem' variable is not defined, so the source never compiled.
That is why it will not link

R. Williams

---------- Original Message -----------
From: balasubramanian vaidhyanathan
To: c...
Sent: Tue, 23 Sep 2008 09:05:35 -0700 (PDT)
Subject: [c6x] tasks setting in DSP/BIOS-URGENT!!!!!

> Hi
>
> I am trying to figure out how to set up tasks in DSP/BIOS. My code
> is as below
> #include
> #include
> #include
> #include
> #include
> #include
> #include
> #include "lab1cfg.h"
>
> Uns counts_per_us;
> void our_task();
> extern LOG_Obj trace;
>
> /* ======== main ======== */
> int main()
> {
> LOG_printf(&trace, "Slice example started!");
> counts_per_us = CLK_countspms() / 1000;
> SEM_post(&sem);
> return;
> }
> void our_task()
> {
> while(1)
> {
> SEM_pend(&sem,SYS_FOREVER);
> LOG_printf(&trace,"Called once \n");
> SEM_pend(&sem,SYS_FOREVER);
> LOG_printf(&trace,"called twice \n");
> }
> }
>
>
> I opened to the cdb file and opened the TSK under Scheduling and
> inserted a task TSK0 and connected it to function _our_task and 0
> arguments and priority 1. Now when i compile this code it says it
> cannot link this function... What am i doing wrong... This is
> urgent... can you please help me in compling this code.....
------- End of Original Message ------- Start a New Thread

Balasubramanian-

> I am trying to figure out how to set up tasks in DSP/BIOS. My code is as below
> #include
> #include
> #include
> #include
> #include
> #include
> #include
> #include "lab1cfg.h"
>
> Uns counts_per_us;
> void our_task();
> extern LOG_Obj trace;
>
> /* ======== main ======== */
> int main()
> {
> LOG_printf(&trace, "Slice example started!");
> counts_per_us = CLK_countspms() / 1000;
> SEM_post(&sem);
> return;
> }
> void our_task()
> {
> while(1)
> {
> SEM_pend(&sem,SYS_FOREVER);
> LOG_printf(&trace,"Called once \n");
> SEM_pend(&sem,SYS_FOREVER);
> LOG_printf(&trace,"called twice \n");
> }
> }
> I opened to the cdb file and opened the TSK under Scheduling and inserted
> a task TSK0 and connected it to function _our_task and 0 arguments and
> priority 1. Now when i compile this code it says it cannot link this
> function... What am i doing wrong... This is urgent... can you please
> help me in compling this code.....

What is the exact error message?

-Jeff Start a New Thread

Jeff

The error is

undefined symbol

_our_task \Debug\lab1cfg.out
lab1 was my project name... I opened the lab1.cdb file and added this function as _our_task to the TSK0 that was inserted as task to the scheduling option. It does not recognise the our_task for whatever reason.....

--- On Tue, 9/23/08, Jeff Brower wrote:
From: Jeff Brower
Subject: Re: [c6x] tasks setting in DSP/BIOS-URGENT!!!!!
To: "Balasubramanian Vaidhyanathan"
Cc: c...
Date: Tuesday, September 23, 2008, 11:54 AM

Balasubramanian-

> I am trying to figure out how to set up tasks in DSP/BIOS. My code is
as below
> #include
> #include
> #include
> #include
> #include
> #include
> #include
> #include "lab1cfg.h"
>
> Uns counts_per_us;
> void our_task();
> extern LOG_Obj trace;
>
> /* ======== main ======== */
> int main()
> {
> LOG_printf(&trace, "Slice example started!");
> counts_per_us = CLK_countspms() / 1000;
> SEM_post(&sem);
> return;
> }
> void our_task()
> {
> while(1)
> {
> SEM_pend(&sem,SYS_FOREVER);
> LOG_printf(&trace,"Called once \n");
> SEM_pend(&sem,SYS_FOREVER);
> LOG_printf(&trace,"called twice \n");
> }
> }
> I opened to the cdb file and opened the TSK under Scheduling and inserted
> a task TSK0 and connected it to function _our_task and 0 arguments and
> priority 1. Now when i compile this code it says it cannot link this
> function... What am i doing wrong... This is urgent... can you please
> help me in compling this code.....

What is the exact error message?

-Jeff Start a New Thread

Here is the lab1cfg.h62 file

;; Do *not* directly modify this file. It was
;; generated by the Configuration Tool; any
;; changes risk being overwritten.
;; INPUT lab1.cdb
;; CONFIGURATION/VERSION INFORMATION
.asg "lab1.cdb", VERS$CDB
.asg ";", VERS$CDBRELATIVEPATH
.asg "lab1cfg", VERS$CFG
.asg "@(#)*** xdc-c38", VERS$TREE
;; EXTERNAL REFERENCES
.globalsegment_name
.globalHWI_unused
.globalRESERVED
.global_FXN_F_nop
.global_CLK_start6x
.globalFXN_F_nop
.globalFXN_F_zero
.globalHWI_F_dispatch
.globalCLK_F_frete
.globalCLK_F_rete
.globalCLK_F_isr
.globalCLK_A_TABBEG
.globalCLK_F_getltime
.globalCLK_F_getBIOStime
.globalCLK_F_getfhtime
.globalCLK_F_getshtime
.globalPRD_F_tick
.globalPRD_F_swi
.global_KNL_tick
.globalLNK_F_dataPump
.globalRTA_F_dispatch
.global_RTDX_Poll
.global_HSRTDX_xmt
.global_HSRTDX_rec
.globalGBL_stackbeg
.global_c_int00
.globalSWI_F_iexec
.globalSWI_F_run
.globalGBL_NULL
.global__HOOK_doCreate
.global__HOOK_doDelete
.global__HOOK_doExit
.global__HOOK_doSwitch
.global__HOOK_doReady
.globalnull
.globalIDL_F_loop
.global_KNL_run
.globalIDL_F_stub5502
.globalIDL_F_stub
.globalIDL_F_calibrate5502
.globalIDL_F_calibrate
.globalIDL_F_busy
.global_UTL_doPutc
.global_UTL_doAbort
.global_UTL_doError
.global_UTL_halt
.global_SEM_create
.global_SEM_delete
.global_SEM_pend
.global_SEM_post
.global_DGN_printFloat
.global_DGN_printHex
.global_DGN_printInt
.globalDGN_CONST
.globalDGN_RAND
.globalDGN_SINE
.globalDGN_USER
.global_DGN_FXNS
.global_DHL_notify
.global_DHL_FXNS
.global_DPI_FXNS
.global_DIO_cbStaticFxns
.global_DIO_tskStaticFxns
.global_DIO_cbDynamicFxns
.global_DIO_tskDynamicFxns
.global_DIO_init
.global_our_task
;; MODULE PARAMETERS
GBL$ .set 1
GBL_ROM .set 00H
GBL_BIGENDIAN .set 00H
GBL_USERINIT .set 00H
GBL_ENABLEINST .set 01H
GBL_CACHE .set 00H
GBL_L2CONFIGURE .set 01H
GBL_L2MODE .set 00H
GBL_L2PRIORITY .set 00H
GBL_L2MARMASK .set 00H
GBL_SUPPORTCSL .set 01H
GBL_TRCMASKVALUE .set 0dbefH
GBL_CALLCSLCFGINIT .set 01H
GBL_C641XL2PRIORITY .set 00H
GBL_L2MARMASK1 .set 00H
GBL_L2MARMASK2 .set 00H
GBL_L2MARMASK3 .set 00H
GBL_L2MARMASK4 .set 00H
GBL_L2MARMASK5 .set 00H
GBL_L2CONFIGALLOC .set 00H
GBL_L2ALLOC .set 02226H
MEM$ .set 1
MEM_gNumHeap .set 01H
OBJ$ .set 0
BUF$ .set 0
BUF_ENABLED .set 01H
CLK$ .set 1
CLK_INTBIT .set 04000H
CLK_REGS .set 01940000H
CLK_TIMERNUM .set 00H
CLK_USETIMER .set 01H
CLK_TCR .set 020H
CLK_TDDR .set 00H
CLK_TDDRHIGH .set 00H
CLK_PRD .set 0124f8H
CLK_PRDHIGH .set 01H
CLK_COUNTSPMS .set 0124f8H
CLK_COUNTSPMSHIGH .set 01H
PRD$ .set 1
PRD_SCALAR .set 04000H
RTDX$ .set 1
RTDX_USERTDX .set 01H
RTDX_USERTEXECUTION .set 00H
RTDX_BUFMEMSIZE .set 0408H
HST$ .set 1
HST_RTDX .set 01H
HST_DSM .set 00H
HST_NONE .set 00H
HST_MAXFRAMESET .set 040H
HST_MAXFRAMEALLOWED .set 0100H
HST_DSMMEMSIZE .set 0400H
HWI$ .set 1
HWI_ZEROTAB .set 01H
HWI_GENERATE_RESET_VEC .set 00H
HWI_POLARITYMASK .set 00H
HWI_INTRMULTLOW .set 0250718a4H
HWI_INTRMULTHIGH .set 082039a3H
SWI$ .set 1
TSK$ .set 1
TSK_STACKSIZE .set 0400H
TSK_PRIORITY .set 01H
TSK_SWITCHFXN .set 00H
TSK_READYFXN .set 00H
TSK_NUM_HOOKS .set 00H
IDL$ .set 1
IDL_USECLKIDLTIME .set 01H
ISRC$ .set 1
LOG$ .set 1
LOG_ENABLED .set 01H
PIP$ .set 0
PIP_gNumEmbed .set 02H
PIP_gNextId .set 00H
SEM$ .set 1
MBX$ .set 0
QUE$ .set 1
LCK$ .set 1
SIO$ .set 0
STS$ .set 1
SYS$ .set 1
GIO$ .set 0
DEV$ .set 0
UDEV$ .set 0
DGN$ .set 0
DHL$ .set 0
DHL_gChannelsAvailable .set 00H
DPI$ .set 0
HOOK$ .set 0
HOOK_KNLID .set 00H
DIO$ .set 0
DIO_STATIC .set 00H
DIO_NUMTSKBASE .set 00H
DIO_NUMSWIBASE .set 00H
DEV$NUMDEVICES .set 0


Note that it has _our_task in the list of functions. This is part of the include files.... Still i get this compile error...


regards
Bala

--- On Tue, 9/23/08, Jeff Brower wrote:

From: Jeff Brower
Subject: Re: [c6x] tasks setting in DSP/BIOS-URGENT!!!!!
To: "Balasubramanian Vaidhyanathan"
Cc: c...
Date: Tuesday, September 23, 2008, 11:54 AM

Balasubramanian-

> I am trying to figure out how to set up tasks in DSP/BIOS. My code is
as below
> #include
> #include
> #include
> #include
> #include
> #include
> #include
> #include "lab1cfg.h"
>
> Uns counts_per_us;
> void our_task();
> extern LOG_Obj trace;
>
> /* ======== main ======== */
> int main()
> {
> LOG_printf(&trace, "Slice example started!");
> counts_per_us = CLK_countspms() / 1000;
> SEM_post(&sem);
> return;
> }
> void our_task()
> {
> while(1)
> {
> SEM_pend(&sem,SYS_FOREVER);
> LOG_printf(&trace,"Called once \n");
> SEM_pend(&sem,SYS_FOREVER);
> LOG_printf(&trace,"called twice \n");
> }
> }
> I opened to the cdb file and opened the TSK under Scheduling and inserted
> a task TSK0 and connected it to function _our_task and 0 arguments and
> priority 1. Now when i compile this code it says it cannot link this
> function... What am i doing wrong... This is urgent... can you please
> help me in compling this code.....

What is the exact error message?

-Jeff Start a New Thread

balasubramanian,

This could be a 'forward reference' problem.

A possible fix is to move the our_task() declaration before the
#include "lab1cfg.h"

R. Williams
---------- Original Message -----------
From: balasubramanian vaidhyanathan
To: Jeff Brower
Cc: c...
Sent: Tue, 23 Sep 2008 10:14:40 -0700 (PDT)
Subject: Re: [c6x] tasks setting in DSP/BIOS-URGENT!!!!!

> Jeff
>
> The error is
>
> undefined symbol
>
> _our_task \Debug\lab1cfg.out
>
> lab1 was my project name... I opened the lab1.cdb file and added this
> function as _our_task to the TSK0 that was inserted as task to the
> scheduling option. It does not recognise the our_task for whatever
> reason.....
>
> --- On Tue, 9/23/08, Jeff Brower wrote:
> From: Jeff Brower
> Subject: Re: [c6x] tasks setting in DSP/BIOS-URGENT!!!!!
> To: "Balasubramanian Vaidhyanathan"
> Cc: c...
> Date: Tuesday, September 23, 2008, 11:54 AM
>
> Balasubramanian-
>
> > I am trying to figure out how to set up tasks in DSP/BIOS. My code is
> as below
> >
> >
> > #include
> > #include
> > #include
> > #include
> > #include
> > #include
> > #include
> > #include "lab1cfg.h"
> >
> > Uns counts_per_us;
> > void our_task();
> > extern LOG_Obj trace;
> >
> > /* ======== main ======== */
> > int main()
> > {
> > LOG_printf(&trace, "Slice example started!");
> > counts_per_us = CLK_countspms() / 1000;
> > SEM_post(&sem);
> > return;
> > }
> > void our_task()
> > {
> > while(1)
> > {
> > SEM_pend(&sem,SYS_FOREVER);
> > LOG_printf(&trace,"Called once \n");
> > SEM_pend(&sem,SYS_FOREVER);
> > LOG_printf(&trace,"called twice \n");
> > }
> > }
> >
> >
> > I opened to the cdb file and opened the TSK under Scheduling and inserted
> > a task TSK0 and connected it to function _our_task and 0 arguments and
> > priority 1. Now when i compile this code it says it cannot link this
> > function... What am i doing wrong... This is urgent... can you please
> > help me in compling this code.....
>
> What is the exact error message?
>
> -Jeff
------- End of Original Message ------- Start a New Thread

Balasubramanian-

> Infact below is the error
>
> undefined first referenced
> symbol in file
> --------- ----------------
> _our_task C:\CCStudio_v3.1\MyProjects\lab1\Debug\lab1cfg.obj

Richard points out that lab1cfg.obj probably didn't compile. Do you see a
lab1cfg.obj file? Does it have today's date and time? Is lab1cfg.c listed in your
source view window?

-Jeff

--- On Tue, 9/23/08, Jeff Brower wrote:

From: Jeff Brower
Subject: Re: [c6x] tasks setting in DSP/BIOS-URGENT!!!!!
To: "Balasubramanian Vaidhyanathan"
Cc: c...
Date: Tuesday, September 23, 2008, 11:54 AM

Balasubramanian-

> I am trying to figure out how to set up tasks in DSP/BIOS. My code is
as below
>
>
> #include
> #include
> #include
> #include
> #include
> #include
> #include
> #include "lab1cfg.h"
>
> Uns counts_per_us;
> void our_task();
> extern LOG_Obj trace;
>
> /* ======== main ======== */
> int main()
> {
> LOG_printf(&trace, "Slice example started!");
> counts_per_us = CLK_countspms() / 1000;
> SEM_post(&sem);
> return;
> }
> void our_task()
> {
> while(1)
> {
> SEM_pend(&sem,SYS_FOREVER);
> LOG_printf(&trace,"Called once \n");
> SEM_pend(&sem,SYS_FOREVER);
> LOG_printf(&trace,"called twice \n");
> }
> }
>
>
> I opened to the cdb file and opened the TSK under Scheduling and inserted
> a task TSK0 and connected it to function _our_task and 0 arguments and
> priority 1. Now when i compile this code it says it cannot link this
> function... What am i doing wrong... This is urgent... can you please
> help me in compling this code.....

What is the exact error message?

-Jeff Start a New Thread

lab1cfg.obj got created... what i notice is this in lab1.map it says _our_task is undefined

address name
------------


0000d020 _memcpy
UNDEFED _our_task
0000cda4 _our_task__Fv
0000f52c _rtdx_buffer_state
0000f54c _rtdx_mon_state


Do you see as UNDEFED... This is what i see in the map of lab1.map...


Please let me know....

--- On Tue, 9/23/08, Jeff Brower wrote:

From: Jeff Brower
Subject: Re: [c6x] tasks setting in DSP/BIOS-URGENT!!!!!
To: "Balasubramanian Vaidhyanathan"
Cc: c...
Date: Tuesday, September 23, 2008, 12:44 PM

Balasubramanian-

> Infact below is the error
>
> undefined first referenced
> symbol in file
> --------- ----------------
> _our_task
C:\CCStudio_v3.1\MyProjects\lab1\Debug\lab1cfg.obj

Richard points out that lab1cfg.obj probably didn't compile. Do you see a
lab1cfg.obj file? Does it have today's date and time? Is lab1cfg.c listed
in your
source view window?

-Jeff

--- On Tue, 9/23/08, Jeff Brower wrote:

From: Jeff Brower
Subject: Re: [c6x] tasks setting in DSP/BIOS-URGENT!!!!!
To: "Balasubramanian Vaidhyanathan"

Cc: c...
Date: Tuesday, September 23, 2008, 11:54 AM

Balasubramanian-

> I am trying to figure out how to set up tasks in DSP/BIOS. My
code is
as below
>
>
> #include
> #include
> #include
> #include
> #include
> #include
> #include
> #include "lab1cfg.h"
>
> Uns counts_per_us;
> void our_task();
> extern LOG_Obj trace;
>
> /* ======== main ======== */
> int main()
> {
> LOG_printf(&trace, "Slice example started!");
> counts_per_us = CLK_countspms() / 1000;
> SEM_post(&sem);
> return;
> }
> void our_task()
> {
> while(1)
> {
> SEM_pend(&sem,SYS_FOREVER);
> LOG_printf(&trace,"Called once \n");
> SEM_pend(&sem,SYS_FOREVER);
> LOG_printf(&trace,"called twice \n");
> }
> }
>
>
> I opened to the cdb file and opened the TSK under Scheduling and
inserted
> a task TSK0 and connected it to function _our_task and 0 arguments
and
> priority 1. Now when i compile this code it says it cannot link this
> function... What am i doing wrong... This is urgent... can you
please
> help me in compling this code.....

What is the exact error message?

-Jeff Start a New Thread

Balasubramanian-

> lab1cfg.obj got created... what i notice is this in lab1.map it says _our_task is undefined
>
> address name
> -------- ----
>
>
> 0000d020 _memcpy
> UNDEFED _our_task
> 0000cda4 _our_task__Fv
> 0000f52c _rtdx_buffer_state
> 0000f54c _rtdx_mon_state

Does "_sem" show in the .map file? If not then you are looking at the wrong
lab1cfg.obj file.

-Jeff

--- On Tue, 9/23/08, Jeff Brower wrote:

From: Jeff Brower
Subject: Re: [c6x] tasks setting in DSP/BIOS-URGENT!!!!!
To: "Balasubramanian Vaidhyanathan"
Cc: c...
Date: Tuesday, September 23, 2008, 12:44 PM

Balasubramanian-

> Infact below is the error
>
> undefined first referenced
> symbol in file
> --------- ----------------
> _our_task
C:\CCStudio_v3.1\MyProjects\lab1\Debug\lab1cfg.obj

Richard points out that lab1cfg.obj probably didn't compile. Do you see a
lab1cfg.obj file? Does it have today's date and time? Is lab1cfg.c listed
in your
source view window?

-Jeff

--- On Tue, 9/23/08, Jeff Brower wrote:

From: Jeff Brower
Subject: Re: [c6x] tasks setting in DSP/BIOS-URGENT!!!!!
To: "Balasubramanian Vaidhyanathan"

Cc: c...
Date: Tuesday, September 23, 2008, 11:54 AM

Balasubramanian-

> I am trying to figure out how to set up tasks in DSP/BIOS. My
code is
as below
>
>
> #include
> #include
> #include
> #include
> #include
> #include
> #include
> #include "lab1cfg.h"
>
> Uns counts_per_us;
> void our_task();
> extern LOG_Obj trace;
>
> /* ======== main ======== */
> int main()
> {
> LOG_printf(&trace, "Slice example started!");
> counts_per_us = CLK_countspms() / 1000;
> SEM_post(&sem);
> return;
> }
> void our_task()
> {
> while(1)
> {
> SEM_pend(&sem,SYS_FOREVER);
> LOG_printf(&trace,"Called once \n");
> SEM_pend(&sem,SYS_FOREVER);
> LOG_printf(&trace,"called twice \n");
> }
> }
>
>
> I opened to the cdb file and opened the TSK under Scheduling and
inserted
> a task TSK0 and connected it to function _our_task and 0 arguments
and
> priority 1. Now when i compile this code it says it cannot link this
> function... What am i doing wrong... This is urgent... can you
please
> help me in compling this code.....

What is the exact error message?

-Jeff Start a New Thread

Balasubramanian-
> I was talking of .map file and i find _sem defined with an address properly.....
>
> Did you have a look at the GUI?....

No point, your GUI is not the issue. If the .map file shows '_sem' but not
'_our_task' then you have a mismatch. Either Richard is correct -- your lab1cfg.c
file does not compile because "sem" is not declared -- or you should show where sem
is declared.

This is a basic compile/link issue. My guess is that another group did this lab
before you and somehow you've got a mix of old and new files, or a filename has been
changed, or other mismatch. Be sure to try "Build All" option.

-Jeff
> Jeff Brower wrote:
>
> Balasubramanian-
>
> > lab1cfg.obj got created... what i notice is this in lab1.map it says
> _our_task is undefined
> >
> > address name
> > -------- ----
> >
> >
> > 0000d020 _memcpy
> > UNDEFED _our_task
> > 0000cda4 _our_task__Fv
> > 0000f52c _rtdx_buffer_state
> > 0000f54c _rtdx_mon_state
>
> Does "_sem" show in the .map file? If not then you are looking at the
> wrong
> lab1cfg.obj file.
>
> -Jeff
>
> --- On Tue, 9/23/08, Jeff Brower wrote:
>
> From: Jeff Brower
> Subject: Re: [c6x] tasks setting in DSP/BIOS-URGENT!!!!!
> To: "Balasubramanian Vaidhyanathan"
> Cc: c...
> Date: Tuesday, September 23, 2008, 12:44 PM
>
> Balasubramanian-
>
> > Infact below is the error
> >
> > undefined first referenced
> > symbol in file
> > --------- ----------------
> > _our_task
> C:\CCStudio_v3.1\MyProjects\lab1\Debug\lab1cfg.obj
>
> Richard points out that lab1cfg.obj probably didn't compile. Do you see a
>
> lab1cfg.obj file? Does it have today's date and time? Is lab1cfg.c listed
>
> in your
> source view window?
>
> -Jeff
>
> --- On Tue, 9/23/08, Jeff Brower wrote:
>
> From: Jeff Brower
> Subject: Re: [c6x] tasks setting in DSP/BIOS-URGENT!!!!!
> To: "Balasubramanian Vaidhyanathan"
>
> Cc: c...
> Date: Tuesday, September 23, 2008, 11:54 AM
>
> Balasubramanian-
>
> > I am trying to figure out how to set up tasks in DSP/BIOS. My
> code is
> as below
> >
> >
> > #include
> > #include
> > #include
> > #include
> > #include
> > #include
> > #include
> > #include "lab1cfg.h"
> >
> > Uns counts_per_us;
> > void our_task();
> > extern LOG_Obj trace;
> >
> > /* ======== main ======== */
> > int main()
> > {
> > LOG_printf(&trace, "Slice example started!");
> > counts_per_us = CLK_countspms() / 1000;
> > SEM_post(&sem);
> > return;
> > }
> > void our_task()
> > {
> > while(1)
> > {
> > SEM_pend(&sem,SYS_FOREVER);
> > LOG_printf(&trace,"Called once \n");
> > SEM_pend(&sem,SYS_FOREVER);
> > LOG_printf(&trace,"called twice \n");
> > }
> > }
> >
> >
> > I opened to the cdb file and opened the TSK under Scheduling and
> inserted
> > a task TSK0 and connected it to function _our_task and 0 arguments
> and
> > priority 1. Now when i compile this code it says it cannot link this
> > function... What am i doing wrong... This is urgent... can you
> please
> > help me in compling this code.....
>
> What is the exact error message?
>
> -Jeff Start a New Thread