|
Hi, We are trying to make a Bootable image from flash to the C6202. DSP/BIOS not used and the program is small enough to fit in to the 64 K. We used hex6x utility to create an image. The image was burned into flash. We could see the image was loaded at address 0 but it is not running. Couple of question Are there special steps to follow when creating the image by using hex6x? Hex6x seems to do something when -boot option is used but there is no documentation about the option any where, any idea? Thanks for the help. ------------------ Hichem Ben Frej |
Booting C6202 from Flash.
Started by ●October 23, 2002
