How interface External LCD Display with TMS320C6713.

Hi friends

Working on Ti-TMS320C6713 dsk (Spectrum Digital board). Want to
interface 2x16 LCD Display with DSK kit. I assume that we may connect
it with GPIO connection. If GPIO is possible to solve this problem,
please tell me , how enable GPIO & interface with LCD.. My software
platform is CCS. So have any particular C code for this interface,
kindly send me. Have any other procedure , you may also advice to me
about this purpose.

wish your great cooperation.

Regards

Gopal Sarkar Start a New Thread

suman,
Is the LCD a serial item connection, parallel connection, 1 bit wide, 8 bits
wide, is the addressing per bit, per char column, per char row, per character,
how many address bits, how many chip select bits, etc?
Is it connected via a SPI bus or what???
R. Williams

---------- Original Message -----------
From: "suman_urfeeling"
To: c...
Sent: Thu, 23 Oct 2008 07:35:11 -0000
Subject: [c6x] How interface External LCD Display with TMS320C6713.

> Hi friends
>
> Working on Ti-TMS320C6713 dsk (Spectrum Digital board). Want to
> interface 2x16 LCD Display with DSK kit. I assume that we may connect
> it with GPIO connection. If GPIO is possible to solve this problem,
> please tell me , how enable GPIO & interface with LCD.. My software
> platform is CCS. So have any particular C code for this interface,
> kindly send me. Have any other procedure , you may also advice to me
> about this purpose.
>
> wish your great cooperation.
>
> Regards
>
> Gopal Sarkar
------- End of Original Message ------- Start a New Thread

suman,

After you get your information, you might check the archives of this
group for solutions. You may find some useful clues there.

,mikedunn

On Thu, Oct 23, 2008 at 10:38 AM, Richard Williams
wrote:
> suman,
> Is the LCD a serial item connection, parallel connection, 1 bit wide, 8 bits
> wide, is the addressing per bit, per char column, per char row, per
> character,
> how many address bits, how many chip select bits, etc?
> Is it connected via a SPI bus or what???
>
> R. Williams
>
> ---------- Original Message -----------
> From: "suman_urfeeling"
> To: c...
> Sent: Thu, 23 Oct 2008 07:35:11 -0000
> Subject: [c6x] How interface External LCD Display with TMS320C6713.
>
>> Hi friends
>>
>> Working on Ti-TMS320C6713 dsk (Spectrum Digital board). Want to
>> interface 2x16 LCD Display with DSK kit. I assume that we may connect
>> it with GPIO connection. If GPIO is possible to solve this problem,
>> please tell me , how enable GPIO & interface with LCD.. My software
>> platform is CCS. So have any particular C code for this interface,
>> kindly send me. Have any other procedure , you may also advice to me
>> about this purpose.
>>
>> wish your great cooperation.
>>
>> Regards
>>
>> Gopal Sarkar
> ------- End of Original Message -------

--
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php Start a New Thread