|
hi all With DSK6711(16-bit codec) can we convert 16-bit PCM to 8-bit.Is their any method to do it without harming sample value too much thank u all seshu |
|
|
64kbps PCM
Started by ●October 25, 2002
Reply by ●October 25, 20022002-10-25
|
One method is to use mu-law or A-law COMPAND Block. This can be done easily by passing the samples thro'h Compand hardware present in the Mcbsp. You need not write any software function instead you can use the on-chip hardware for this. Simha --- k seshu babu <> wrote: > hi all > > With DSK6711(16-bit codec) can we convert 16-bit PCM > to > 8-bit.Is their any method to do it without harming > sample value too much > > thank u all > > seshu |
|
|
Reply by ●October 25, 20022002-10-25
|
K Seshu Babu- > With DSK6711(16-bit codec) can we convert 16-bit PCM to > 8-bit.Is their any method to do it without harming sample value too much Try u-Law, standard telephony method to compress samples to 8-bit. I don't think the feature is built into the AD535 codec on the DSK board, so you might try simple software formula. Jeff Brower DSP sw/hw engineer Signalogic |
