|
Hi Vincent I have been trying various programs since your very helpful comments. Though so far without much real success!! Having had problems loading programs on the dsk (6711) - it seems to fail after the first load of RF3. If I compile and reload then the program does not read audio data - I tried the cnftest program that is supplied - this gets to handshaking and hangs. Does anyone know if this program is actually working? i can't find any docs about it. If it shoudl work then my board may be faulty since I also get very strange sampling artifacts and problems when I change the buffer frame size on the RF3 program. Has anyone used this DSK to do real development? Thank you Joie |
|
|
re DSK6711 conftest
Started by ●November 25, 2002
Reply by ●November 27, 20022002-11-27
|
Hi Joie, Have you had a chance to verify if you have DSK6211_6711.gel selected in CCSetup and do Debug -> CPU Reset as I mentioned previously? RF3 should work if the board is setup correctly. Which versions of CCS and RF3 are you using? When changing the frame length in RF3, make sure to update the frame lengths in the PIP objects' properties in the .cdb file. Without that the driver will not work correctly. Vincent --- In c6x@y..., Joie Armstrong <joiedsp@y...> wrote: > Hi Vincent > > I have been trying various programs since your very helpful comments. Though so far without much real success!! > > Having had problems loading programs on the dsk (6711) - it seems to fail after the first load of RF3. If I compile and reload then the program does not read audio data - I tried the cnftest program that is supplied - this gets to handshaking and hangs. > > Does anyone know if this program is actually working? i can't find any docs about it. If it shoudl work then my board may be faulty since I also get very strange sampling artifacts and problems when I change the buffer frame size on the RF3 program. > > Has anyone used this DSK to do real development? > > Thank you > > Joie |
