Just in case anyone HAPPENS to be working through the XMas break like me, I have a question concerning multiple-dsp setup. I setup Code Composer Studio 1.23 in a three 6203 DSPs configuration, Im also using Spectrum Digital's SPI515 Parallel Port Emulator. Physically, the three DSP's TDI and TDO are chained together. They all share common buses (Expansion Bus, etc.). When I try to launch Code Composer the "cant verify" dsp message box appears. Is there any other setup that needs to be done, any special data that needs to be latched in to the dsps when the reset goes up? I feel if I can get the emulator working I can download then download the program code to the individual dsps. Anyone run into this type of thing before? Thanks and Happy Holidays! Erich _____________________________________________________________ |
|
Happy Holidays!
RE: [c6x] Happy Holidays!
Well unfortunately CCS1.23 is for C6711 DSKs. You need CCS full tools version 1.20, 2.0, 2.1 ... Regards,
-----Original Message-----
Just in case anyone HAPPENS to be working through the
I setup Code Composer Studio 1.23 in a three 6203 DSPs
configuration,
When I try to launch Code Composer the "cant verify"
dsp message
I feel if I can get the emulator working I can download
then
Anyone run into this type of thing before? Thanks and Happy Holidays!
_____________________________________
_____________________________________
To Join: Send an email to c...@yahoogroups.com To Post: Send an email to c...@yahoogroups.com To Leave: Send an email to c...@yahoogroups.com Archives: http://www.yahoogroups.com/group/c6x Other Groups: http://www.dsprelated.com
" TARGET="_blank">http://docs.yahoo.com/info/terms/ |