MSP430 not recognized by emulator

Hello all,
I hv a Lyrtech DM648EVM which has on board MSP430 with a JTAG support for programming. I hv recently purchased TI MSP-FET430UIF (USB) programmer for it with the IAR kick start(EWB). The problem is, on board MSP430 controller is not recognised by Emulator although I have followed all the instructions. Is there any other HW/SW needed (in addition to one I hv)to Program on Board MSP430?

Waiting for ur reply
Ahmed

_____________________________________ Start a New Thread

Ahmed,

On Tue, Jul 27, 2010 at 11:00 PM, wrote:

> Hello all,
> I hv a Lyrtech DM648EVM which has on board MSP430 with a JTAG support for
> programming. I hv recently purchased TI MSP-FET430UIF (USB) programmer for
> it with the IAR kick start(EWB). The problem is, on board MSP430 controller
> is not recognised by Emulator although I have followed all the instructions.
> Is there any other HW/SW needed (in addition to one I hv)to Program on Board
> MSP430?
>

The TI MSP-FET430UIF should program any MSP430 target when properly
connected.
1. Are you connecting to the MSP430 JTAG connector?? [It is different than
the DM648 JTAG connector]
2. Does Lyrtech furnish any info about programming the MSP430??
If their docs don't say anything and they do not furnish the source code, it
is possible that they have blown the security fuse to keep the contents
secret.
3. Are there any Lyrtech DM648EVM users lurking out there who have accessed
or programmed the MSP430??
4. Do you have access to any other MSP430 targets to verify your FET??

NOTE:
I do not have much experience with the MSP430.
I have not used the Lyrtech DM648EVM.

mikedunn

>
> Waiting for ur reply
> Ahmed
>
>

--
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php Start a New Thread

1. Yes i am connecting to MSP430 JTAG connector.
2. Lyrtech didn't provide any information as to how to program On Board MSP430.
3. No I just have the unprogrammed IC with DM648EVM Lyrtech board. I haven't tested it with other target device, According to device manager window and Catalog provided with the emulator it (MSP-FET430UIF) seems fine.   

--- On Thu, 29/7/10, Michael Dunn wrote:
From: Michael Dunn
Subject: Re: [c6x] MSP430 not recognized by emulator
To: a...@yahoo.com
Cc: c...
Date: Thursday, 29 July, 2010, 12:10 AM
Ahmed,
On Tue, Jul 27, 2010 at 11:00 PM, wrote:
 

Hello all,
I hv a Lyrtech DM648EVM which has on board MSP430 with a JTAG support for programming. I hv recently purchased TI MSP-FET430UIF (USB) programmer for it with the IAR kick start(EWB). The problem is, on board MSP430 controller is not recognised by Emulator although I have followed all the instructions. Is there any other HW/SW needed (in addition to one I hv)to Program on Board MSP430?


The TI MSP-FET430UIF should program any MSP430 target when properly connected.
1. Are you connecting to the MSP430 JTAG connector??   [It is different than the DM648 JTAG connector]
2. Does Lyrtech furnish any info about programming the MSP430??
If their docs don't say anything and they do not furnish the source code, it is possible that they have blown the security fuse to keep the contents secret.
3. Are there any Lyrtech DM648EVM users lurking out there who have accessed or programmed the MSP430??
4. Do you have access to any other MSP430 targets to verify your FET??

NOTE:
I do not have much experience with the MSP430.
I have not used the Lyrtech DM648EVM.

mikedunn

Waiting for ur reply
Ahmed

--
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php
#yiv2109377642 #yiv2109377642avg_ls_inline_popup {padding:0px 0px;margin-left:0px;margin-top:0px;width:240px;overflow:hidden;word-wrap:break-word;color:black;font-size:10px;text-align:left;line-height:13px;} Start a New Thread