Hi,
I left the processor running over night to perform FFT canculation of 10 kHz
signal coming from the function generator and save it to a text file. Next day
it was still running but not writing to the text file. I realized that it has
stopped writing to the text files after 5 hours and kept running in free mode
rest of the 10 hours. It also showed error of USB connection when I tried to
HALT the processor in the morning.
Since then I have been trying to connect to C6713 DSK with CCS 3.1 using USB
connection but it doesn't connect and gives the following error.
Error connecting to the target.
Error 0x80000200/-1040
Fatal Error during OCS
Device Driver: Invalid scan path
Sequence ID: 0
Error Code: -1040
Error Class: 0x80000200
I/O Port: = 540
I have re-installed the CCS and other drivers as well but all in vain. I
believe Processors are robust and shouldn't get damaged just because it ran
for 15 hours. Can you please help me finding what's wrong ?
I will appreciate your help.
Regards,
BAS
