-----Original Message-----From: raja
nayaka To: c...@yahoogroups.com Cc: j...@ateme.fr Sent:
29/01/03 07:31Subject: RE: [c6x] booting problemhello we
ensured that DSP is not in permanent reset state, we have connected LED on RESET
pin, with which we can observe RESET is behaving
properly. thanking you Raja Jitendra
Nayaka. Jean-Michel MERCIER wrote:Hello, Check the
RESET pin ?You said it is your board, so I believe you should findeasily if
something is going wrong. I am not allowed to answer directly. Please keep the
conversationon the yahoogroups forums. Best regards, Jean-Michel
Mercier-----Message d'origine----- De : raja nayaka
[mailto:n...@yahoo.co.in] Envoy: mardi 28 janvier 2003
08:10 : j...@ateme.fr Objet : RE:
[c6x] booting problem Dear
Jean-Michel MERCIER thanks for response, can you please
give hints about ,how to ensure DSP is in permanent reset?...
thanking you
R.J.Nayaka Scientist
ITI Ltd, bangalore
Jean-Michel MERCIER wrote: It looks like
the DSP is in permanent reset.
Jean-Michel
MERCIER -- dsp imaging -
www.ateme.com ATEME - 26 Burospace - 91573
BIEVRES Tel : +33 (0)1 69 35 89 73
(direct) Fax : +33 (0)1 60 19 13
95 -----Message
d'origine----- De : raja nayaka
[mailto:n...@yahoo.co.in] Envoy: vendredi 24 janvier
2003 07:24 :
c...@yahoogroups.com Objet : [c6x] booting
problem Hello
pals The code gets loaded onto the on-chip
memory of the DSP but the program counter does not vary i.e. it remains at
0x00000000. I believe ...even if thers a junk
code to execute the PC should vary to some value apart from being
0x000000000. Can
any one suggest as whats the problem. Thanking
you Nayaka --------------------------------- FULCRUM, Hillbottom Road High Wycombe, HP12 4HJ Tel : +44 (0)1494
437575 Fax: +44 (0)1494 473324
|