DSPRelated.com
Forums
   Forums    More Forums    c6x  

Simulating McBSP

Started by jvirzi2000 ●May 8, 2003
If I generate the McBSP frame sync, and clock internally, can I
simulate the McBSP?

I have set up DMA to service the McBSP, but aside from feeding DXR one
or two words, it just sits there without advancing. I do not see the
status bits of the SPCR changing, so my guess is that it is not
running inside the simulator.

Thanks,

Joe



Reply by Alexandre Freire da Silva Osorio ●May 9, 20032003-05-09
Hi,

In respect to this question I have another one.

How can I simulate an external frame sync in McBSP? I have tried to use "Pin
Connection" in CCS 2 but it didn't work. The chip is C6203.

Thanks.

Regards,
Alexandre

-----Original Message-----
From: jvirzi2000 [mailto:]
Sent: Thursday, May 08, 2003 7:02 PM
To:
Subject: [c6x] Simulating McBSP If I generate the McBSP frame sync, and clock internally, can I
simulate the McBSP?

I have set up DMA to service the McBSP, but aside from feeding DXR one
or two words, it just sits there without advancing. I do not see the
status bits of the SPCR changing, so my guess is that it is not
running inside the simulator.

Thanks,

Joe
_____________________________________
Note: If you do a simple "reply" with your email client, only the author of this
message will receive your answer. You need to do a "reply all" if you want your
answer to be distributed to the entire group.

_____________________________________
About this discussion group:

To Join: Send an email to

To Post: Send an email to

To Leave: Send an email to

Archives: http://www.yahoogroups.com/group/c6x

Other Groups: http://www.dsprelated.com ">http://docs.yahoo.com/info/terms/