Hello: Recently bought a IEKC64x board from ATEME. I would like to use it as stand-alone and connect to the PC's parallel port just as I use the C6711 DSK (i.e. use CCS and download *.out files to the board and run) ; but there is no embedded emulator like in the 6711DSK where we connect to the parallel port of the DSK. There are no such cables in this (expensive) box from ATEME (nor help! ). Would like to know whether I just need a cable connecting the PC's parallel port to the 14-pin JTAG slot of the IEKC64X or would I also need an external XDS510 emulator. Also, how would I use the J5 header (14-pin JTAG port) in the C6711DSK ? Is this different from using the JTAG port on the IEKC64X ? Really appreciate any help, Thank you very much, ka |
|
Basic question on IEKC64x
Started by ●May 29, 2003
Reply by ●May 29, 20032003-05-29
You would need an external emulator. There are several companies that
sell parallel port (and USB) emulators that would plug into the JTAG header. A partial list with prices is available on the TI website: http://focus.ti.com/catalog/docs/thirdpartytoollist.tsp?toolTypeId&famId= 132&documentTypeId=4&templateIdV81&navigationId29 Regards, Thom -----Original Message----- From: akalya [mailto:] Sent: Thursday, May 29, 2003 8:59 AM To: Subject: [c6x] Basic question on IEKC64x Hello: Recently bought a IEKC64x board from ATEME. I would like to use it as stand-alone and connect to the PC's parallel port just as I use the C6711 DSK (i.e. use CCS and download *.out files to the board and run) ; but there is no embedded emulator like in the 6711DSK where we connect to the parallel port of the DSK. There are no such cables in this (expensive) box from ATEME (nor help! ). Would like to know whether I just need a cable connecting the PC's parallel port to the 14-pin JTAG slot of the IEKC64X or would I also need an external XDS510 emulator. Also, how would I use the J5 header (14-pin JTAG port) in the C6711DSK ? Is this different from using the JTAG port on the IEKC64X ? Really appreciate any help, Thank you very much, ka _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: Send an email to To Post: Send an email to To Leave: Send an email to Archives: http://www.yahoogroups.com/group/c6x Other Groups: http://www.dsprelated.com ">http://docs.yahoo.com/info/terms/ |
|
Reply by ●May 29, 20032003-05-29
The NVDK 64x from ATEME needs a external emulator. It usually comes bundled
with the hardware. Have you checked your shipping box carefully? Was any emulator there in the list of shipping items? akalya <> wrote: Hello: Recently bought a IEKC64x board from ATEME. I would like to use it as stand-alone and connect to the PC's parallel port just as I use the C6711 DSK (i.e. use CCS and download *.out files to the board and run) ; but there is no embedded emulator like in the 6711DSK where we connect to the parallel port of the DSK. There are no such cables in this (expensive) box from ATEME (nor help! ). Would like to know whether I just need a cable connecting the PC's parallel port to the 14-pin JTAG slot of the IEKC64X or would I also need an external XDS510 emulator. Also, how would I use the J5 header (14-pin JTAG port) in the C6711DSK ? Is this different from using the JTAG port on the IEKC64X ? Really appreciate any help, Thank you very much, ka _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: Send an email to To Post: Send an email to To Leave: Send an email to Archives: http://www.yahoogroups.com/group/c6x Other Groups: http://www.dsprelated.com ">http://docs.yahoo.com/info/terms/ --------------------------------- |
|
Reply by ●May 30, 20032003-05-30
Indrajit Chakrabarty wrote : > The NVDK 64x from ATEME needs a external emulator. It usually > comes bundled with the hardware. Have you checked your shipping > box carefully? Was any emulator there in the list of shipping items? It depends on the option you choose. The 4500$ option doesn't include CCS nor Emulator The 6000$ option does include CCS + XDS510PP When working on imaging and video, software may be large or you may want to see images through CCS View -> Graph -> Image. The XDS510PP is quite slow for that usage and you should consider a PCI emulator. When NVDK is bought directly from ATEME, there is an offer for the ATEME aDICE710 PCI emulator. If you need USB emulator, consider those from Softronics (www.softronx.com). Note that Kane Computing, a major UK based DSP Tools distrutor have done a very interresting survey on emulators with performance comparisons. Check their web site. Best regards, Jean-Michel MERCIER. |