|
Hi all Why 'internal to internal edma transfer' is more slow then 'external to external'? Im working with TMS6415-500MHz. Thank you very much in advance, Regards James |
|
|
EDMA problem.
Started by ●June 2, 2003
Reply by ●June 2, 20032003-06-02
|
Hi, From my experiences, Internal to Internal transfer is better done by memcpy which will be faster than DMA. You can use DMA for external to internal or vice-versa or external to external. Thanks and Regards, Ganesh ----- Original Message ----- From: ugieugie77 To: Sent: Monday, June 02, 2003 1:55 PM Subject: [c6x] EDMA problem. Hi all Why 'internal to internal edma transfer' is more slow then 'external to external'? Im working with TMS6415-500MHz. Thank you very much in advance, Regards James _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: Send an email to To Post: Send an email to To Leave: Send an email to Archives: http://www.yahoogroups.com/group/c6x Other Groups: http://www.dsprelated.com ">http://docs.yahoo.com/info/terms/ |
