|
Dear All, I have some question about Code Composer. Currently, I am using Code composer v.2.1 which is distributed together with DSK6711. In my previous email, I have said that I have planned to buy XDS560. I just want to make sure whether XDS560 could work together within my code composer which distributed together with DSK6711 so I mustn't buy the Full Version of the Code Composer (the new version is 2.2). So the question is : Should I buy the Full version Code Composer v.2.2, in order to use the XDS560. And do anyone know the difference between Code Composer v.2.2 with the Code Composer which distributed together with DSK6711. |
|
|
Code Composer v.2.1+ XDS560
Started by ●June 9, 2003
Reply by ●June 9, 20032003-06-09
|
Hi,
I don't know the version of CCS
distributed with DSK6711 but guess it must be CCS 2.10.
I guess it would be better if you can procure
CCS 2.20 as there are some issues yet with CCS 2.10.
Hope this helps.
Ganesh
|
|
|
Reply by ●June 9, 20032003-06-09
|
--- Ganesh Vijayan <> wrote: > Hi, > I don't know the version of CCS distributed with > DSK6711 but guess it must be CCS 2.10. > I guess it would be better if you can procure CCS > 2.20 as there are some issues yet with CCS 2.10. > Hope this helps. > Ganesh The Code composer version which distributed with DSK6711 is 2.10. According to the XDS510 requirement in TI website that Code Composer ver.2.1 is supporting XDS510. I have discussed with my local TI product distributor but they said that Code composer which distributed with DSK6711 didnt support for XDS510. So I have a little confusion about XDS510 and Code composer which distribution with DSK6711. So I just wonder to know whether if I dont buy the Full version of Code Composer (CCS ver2.2) I still could use the XDS560. Because I have to buy the Code Composer v2.2 It will cost me very much. ===== Best Regards, Henrry Andrian - Researcher ISCI Lab (http://isci.cn.nctu.edu.tw) Office Ph. +886 3 5712121 ext: 54358 Mobile Ph. +886 931198986 National Chiao Tung University (http://www.nctu.edu.tw) Hsinchu - Taiwan, ROC __________________________________ |
Reply by ●June 9, 20032003-06-09
|
Hi,
XDS560 works satisfactorily with CCS 2.10 or
CCS 2.12 but 2.10 is bare minimum.
But if you have some application based on
endianess, XDS560 gives some problems as there are some issues still to be
cleared.
It isn't mandatory to use CCS 2.20
for XDS560. Preferably if you have a XDS510PP then its the best JTAG to use with
any board.
Hope this solves your problem.
Thanks and Regards,
Ganesh
|
|
|
Reply by ●June 9, 20032003-06-09
|
Hi, Could you give more detail about the problem if I using CCS with XDS560. Are you using both XDS560 and XDS510 ? And could you give me some information about that ? --- Ganesh Vijayan <> wrote: > Hi, > XDS560 works satisfactorily with CCS 2.10 or CCS > 2.12 but 2.10 is bare minimum. > But if you have some application based on endianess, > XDS560 gives some problems as there are some issues > still to be cleared. > It isn't mandatory to use CCS 2.20 for XDS560. > Preferably if you have a XDS510PP then its the best > JTAG to use with any board. > Hope this solves your problem. > Thanks and Regards, > Ganesh ===== Best Regards, Henrry Andrian - Researcher ISCI Lab (http://isci.cn.nctu.edu.tw) Office Ph. +886 3 5712121 ext: 54358 Mobile Ph. +886 931198986 National Chiao Tung University (http://www.nctu.edu.tw) Hsinchu - Taiwan, ROC __________________________________ |
Reply by ●June 9, 20032003-06-09
|
Henry, The CCS that comes with DSKs will not work with XDS510 or 560. It is a special version just for DSKs (it is only $200-400 so you basically pay only for the board) and you will have to buy a full CCS version when you want to debug your own board. Jerry ----- Original Message ----- From: "Henrry Andrian" <> To: <> Sent: Monday, June 09, 2003 4:33 AM Subject: [c6x] Code Composer v.2.1+ XDS560 > Dear All, > > I have some question about Code Composer. Currently, I am using Code > composer v.2.1 which is distributed together with DSK6711. In my > previous email, I have said that I have planned to buy XDS560. I > just want to make sure whether XDS560 could work together within my > code composer which distributed together with DSK6711 so I mustn't > buy the Full Version of the Code Composer (the new version is 2.2). > So the question is : Should I buy the Full version Code Composer > v.2.2, in order to use the XDS560. > > And do anyone know the difference between Code Composer v.2.2 with > the Code Composer which distributed together with DSK6711. > > > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://www.yahoogroups.com/group/c6x > > Other Groups: http://www.dsprelated.com > ">http://docs.yahoo.com/info/terms/ > > |
