320AD535 drivers for C6711 DSK

Zeeshan,

The Driver Development Kit includes support for the AD535 codec on the C6711 DSK, which can be found with the following URL:

http://dspvillage.ti.com/docs/catalog/software/details.jhtml?templateIdQ54&path=templatedata/cm/swdetail/data/perifdvr_ddk

Also, there is an application report SPRA850, "A DSP/BIOS AD535 Codec Device Driver for the TMS320C6x11 DSK" that you will want to read.

Hope this helps!

Regards,
Tom Dillon

-----Original Message-----
From: zee_shan_anwar [mailto:z...@yahoo.com]
Sent: Tuesday, June 10, 2003 12:48 AM
To: c...@yahoogroups.com
Subject: [c6x] 320AD535 drivers for C6711 DSK

Hi All,
I am using C6711 DSK. I need to use on-board 320AD535 codec for
audio I/O. However, I could not find the support in Data Converter
Plug-Ins (DCP) to generate the driver files for 320AD535.
Can anyone please help me by either sending me a CCS patch that add
the DCP support of 320AD535 OR the driver code for AD535 on C6711.
Thanking you in advance.
Best Regards,
Zeeshan Anwar

_____________________________________
Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer.  You need to do a "reply all" if you want your answer to be distributed to the entire group.

_____________________________________
About this discussion group:

To Join:  Send an email to c...@yahoogroups.com

To Post:  Send an email to c...@yahoogroups.com

To Leave: Send an email to c...@yahoogroups.com

Archives: http://www.yahoogroups.com/group/c6x

Other Groups: http://www.dsprelated.com
 

" TARGET="_blank">http://docs.yahoo.com/info/terms/