|
Hello, Another daughter card that you might consider using is the one sold by TI, which also uses the PCM3003 stereo codec. The part number is: TMDX326040A. The one sold by Integrated DSP is nice and small, does not require fiddling around with jumpers and does not have (chances are you won't use them anyway) the microphones that come with the TI one. The draw back is that if you want to buy ONE, you use paypal and buy it; if you want more than one, you use paypal and get dinged delivery charges for every one of them (unless it's been fixed since the time I used it). The manual for the TI daughtercard is awful; the Integrated DSP card does not need one (plug in and off you go), and it comes with a CD with examples, etc. For code examples, you can also look at the educator's exchange site on TI, or look for the book by Rulph Chassaing called "DSP Applications using C and the TMS320C6x DSK". The examples and appendix provide you with enough explanation. You can always get the example code from the Chassaing book and adapt them (not much to do) to the Integrated DSP daughtercard. The bottom line is that these two cards are almost the same in hardware and software; I'd suggest you go for price. If you are a large university, go for whichever one that can be donated to you ;-) Cheers, bkf@ ----- Forwarded message from J G <> ----- Date: Fri, 13 Jun 2003 10:35:05 -0700 (PDT) From: J G <> Reply-To: J G <> Subject: Re: [c6x] Daughter Card Interface to 6711 DSK To: kool_karni <> Hi, You probably could interface that card to the DSK. However there are companies that sell daughter cards with stereo CODECs on board. Integrated DSP www.integrated-dsp.com is one such company. Thier boards come with support software and example algorithms. One of the examples is an adaptive noise canceller based on an LMS algorithm I believe... J --- kool_karni <> wrote: > Hi All, > > I am trying to implement an Adaptive Noise Canceller > Application on > 6711 for which I need additional input channel. As > such I am thinking > of interfacing TLV320AIC10/11 Codec to the DSK...not > too sure. Can I > interface the above mentioned codec card with DSK??? > If yes how can > I go abt. the same? If not what other codec cards > one can interface > to the 6711 DSK?? > > Your help is highly appreciated. > > Thanks in advance. > > Regds > Anand > > _____________________________________ > Note: If you do a simple "reply" with your email > client, only the author of this message will receive > your answer. You need to do a "reply all" if you > want your answer to be distributed to the entire > group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > To Post: Send an email to > > To Leave: Send an email to > Archives: http://www.yahoogroups.com/group/c6x > > Other Groups: http://www.dsprelated.com > ">http://docs.yahoo.com/info/terms/ __________________________________ _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: Send an email to To Post: Send an email to To Leave: Send an email to Archives: http://www.yahoogroups.com/group/c6x Other Groups: http://www.dsprelated.com ">http://docs.yahoo.com/info/terms/ ----- End forwarded message ----- ------------- This mail sent through IMP: http://horde.org/imp/ |
|
|
Fwd: Re: Daughter Card Interface to 6711 DSK
Started by ●June 13, 2003
Reply by ●June 16, 20032003-06-16
|
Hi KK and BKF, The problem with PayPal and shipping has been fixed!! It was quirk at first but has been corrected for a while. Glad you like the eDAC-PCM3003. There are more examples on the website at http://www.integrated-dsp.com/software/c6xdsk/eDAC-PCM3003/. Our hardware will work with Chassaings code almost unchanged. Our chief engineering helped Rulph with some of the examples in the book. Our high end card the eDAC-Audio512 is mentioned in an appendix. BKF, you are right both cards are similar in hardware but ours has no jumpers, software selectable sample rates, and better examples (of course that is a biased opinion :) ). Pick one and you should be off... Good luck... iDSP Team. > ATTACHMENT part 2 message/rfc822 > To: > CC: > From: > Date: Fri, 13 Jun 2003 15:49:38 -0400 > Subject: Fwd: Re: [c6x] Daughter Card Interface to > 6711 DSK > > Hello, > > Another daughter card that you might consider using > is the one sold by TI, > which also uses the PCM3003 stereo codec. The part > number is: TMDX326040A. > > The one sold by Integrated DSP is nice and small, > does not require fiddling > around with jumpers and does not have (chances are > you won't use them anyway) > the microphones that come with the TI one. The draw > back is that if you want > to buy ONE, you use paypal and buy it; if you want > more than one, you use > paypal and get dinged delivery charges for every one > of them (unless it's been > fixed since the time I used it). The manual for the > TI daughtercard is awful; > the Integrated DSP card does not need one (plug in > and off you go), and it > comes with a CD with examples, etc. > > For code examples, you can also look at the > educator's exchange site on TI, or > look for the book by Rulph Chassaing called "DSP > Applications using C and the > TMS320C6x DSK". The examples and appendix provide > you with enough explanation. > You can always get the example code from the > Chassaing book and adapt them > (not much to do) to the Integrated DSP daughtercard. > > The bottom line is that these two cards are almost > the same in hardware and > software; I'd suggest you go for price. If you are a > large university, go for > whichever one that can be donated to you ;-) > > Cheers, > bkf@ > > ----- Forwarded message from J G > <> ----- > Date: Fri, 13 Jun 2003 10:35:05 -0700 (PDT) > From: J G <> > Reply-To: J G <> > Subject: Re: [c6x] Daughter Card Interface to 6711 > DSK > To: kool_karni <> > > Hi, > > You probably could interface that card to the DSK. > However there are companies that sell daughter cards > with stereo CODECs on board. Integrated DSP > www.integrated-dsp.com is one such company. Thier > boards come with support software and example > algorithms. One of the examples is an adaptive > noise > canceller based on an LMS algorithm I believe... > > J > --- kool_karni <> wrote: > > Hi All, > > > > I am trying to implement an Adaptive Noise > Canceller > > Application on > > 6711 for which I need additional input channel. As > > such I am thinking > > of interfacing TLV320AIC10/11 Codec to the > DSK...not > > too sure. Can I > > interface the above mentioned codec card with > DSK??? > > If yes how can > > I go abt. the same? If not what other codec cards > > one can interface > > to the 6711 DSK?? > > > > Your help is highly appreciated. > > > > Thanks in advance. > > > > Regds > > Anand > > > > > > > > _____________________________________ > > Note: If you do a simple "reply" with your email > > client, only the author of this message will > receive > > your answer. You need to do a "reply all" if you > > want your answer to be distributed to the entire > > group. > > > > _____________________________________ > > About this discussion group: > > > > To Join: Send an email to > > > > > > To Post: Send an email to > > > > To Leave: Send an email to > > > > > > Archives: http://www.yahoogroups.com/group/c6x > > > > Other Groups: http://www.dsprelated.com > > > > > > ">http://docs.yahoo.com/info/terms/ > > > > __________________________________ > > _____________________________________ > Note: If you do a simple "reply" with your email > client, only the author of > this message will receive your answer. You need to > do a "reply all" if you > want your answer to be distributed to the entire > group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > To Post: Send an email to > > To Leave: Send an email to > Archives: http://www.yahoogroups.com/group/c6x > > Other Groups: http://www.dsprelated.com > ">http://docs.yahoo.com/info/terms/ > ----- End forwarded message ----- > > > ------------- > This mail sent through IMP: http://horde.org/imp/ > _____________________________________ > Note: If you do a simple "reply" with your email > client, only the author of this message will receive > your answer. You need to do a "reply all" if you > want your answer to be distributed to the entire > group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > To Post: Send an email to > > To Leave: Send an email to > Archives: http://www.yahoogroups.com/group/c6x > > Other Groups: http://www.dsprelated.com > ">http://docs.yahoo.com/info/terms/ __________________________________ |
