Cerdar Chen- -open SDConfig icon on desktop -open correct LPT port I/O address -double-click on Emu A properties dialog should open and you should see a box marked "Emulator Port Speed". But again, I think this is a host software transfer rate setting. I know it does not affect rate of the JTAG clock (TCK) signal. -Jeff > >From: Jeff Brower <> > >To: Gagan Singh <> > >CC: , , > >Subject: [c6x] Re: [c55x] CC and JTAG with other devices in the scan chain > >Date: Tue, 03 Jun 2003 08:17:58 -0500 > > >Do you know how to slow the JTAG clock with Spectrum Digital XDS510PP > emulator? > >There have been a few times before we wanted to slow the clock for board > debug > >purposes. There is a "Speed" control in the SDConfig setup, but I think > that is a > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Where? I can not find it. > >host software transfer rate setting. > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > How to set it? > > Thank you very much > > > >Jeff Brower > >system engineer > >Signalogic |
Re: How to control the speed of XDS510PP emulator?
Started by ●July 3, 2003