|
Hi ! I am planning to design GUI in Matlab which can show the charachteristics of the functions which is running on my target DSP. unfortunately I don't have the Matlab tools like "link for CCS ", in this case I am not sure whether I can accomplish it without these tools. are there anybody have exeperince? since I am the beginner I need your expertise's advice, thanks. regards |
|
|
Matlab inrterface with CCS
Started by ●July 11, 2003
Reply by ●July 11, 20032003-07-11
|
Aizezi, You will need the Matlab Link to CCS, so if you don't have one you can download a 30-day demo version from Mathworks. If will work with the CCS simulator or with your target board if you have a JTAG emulator that supports RTDX. Mathworks has a few ready to play with examples, so you should not have any problems getting started. Jerry Signum Systems www.signum.com =================================================== Emulators, Compilers, Debuggers, RTOS for: 8051, ARM, OMAP, 186, 166, TriCore, Z8 and TMS320 DSPs =================================================== ----- Original Message ----- From: "Aizezi Abuding" <> To: <> Sent: Friday, July 11, 2003 2:49 AM Subject: [c6x] Matlab inrterface with CCS > > Hi ! > I am planning to design GUI in Matlab which can show the > charachteristics of the functions which is running on my target DSP. > unfortunately I don't have the Matlab tools like "link for CCS ", in this > case I am not sure whether I can accomplish it without these tools. > are there anybody have exeperince? since I am the beginner I need your > expertise's advice, thanks. > > regards |
