I use the PCM3003 audio daughter card with the C6711 DSK board.
I want to use a different sample frequency than 24KHz or 48KHz
provide by the audio card.
I use the programm "electronic crossover" from Richard Sikora. With
this programm you can choose the sample frequency using the Timer 0.
So I put Jumper 5 of the audio card to pins 1&2 to use the master
clock from the DSK board(from Timer 0) but nothing happen and I have
no signal on my codec output. (when I use the clock from the audio
card that works).
Could you help me? Have I to change anything else than the jumper 5?