|
Hi, i've to port my DSP/BIOS application from dsk 6711 to dsk 6713, the problem is that i wrote myself a driver for the codec AD535 and now i need something for the codec AIC23. My application use Serial Port 0 tx interrupt to get data from the codec, have you got some code examples for the newest 6713 dsk? |
|
|
Porting from dsk 6711 to dsk 6713
Started by ●July 23, 2003
Reply by ●July 24, 20032003-07-24
|
Hi. I have also a DSK6713. If you have the original package with the CD... then there are also example programs, using the McBSP with the onboard codec. This is only having block transfers, but you can easily change that! Regards, Anton Prins Aanhalen puffoinkazzato <>: > Hi, i've to port my DSP/BIOS application from dsk 6711 to dsk 6713, > the problem is that i wrote myself a driver for the codec AD535 and > now i need something for the codec AIC23. My application use Serial > Port 0 tx interrupt to get data from the codec, have you got some > code examples for the newest 6713 dsk? > > > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author > of this message will receive your answer. You need to do a "reply all" > if you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://www.yahoogroups.com/group/c6x > > Other Groups: http://www.dsprelated.com > ">http://docs.yahoo.com/info/terms/ > |
