hi all,
I have been accepting data via Mcbsp0 from AD535 codec, the problem i face
is that that although the signal applied to A/D converter is square pulse, the
received data stored in an array does not change its value, consequently the
graph plotted shows a dc pulse, where as the input is ac.
Any Ideas, i have varied the frequency, but ontained the
same results.
fahim
|
data values read from Codec
Started by ●July 28, 2003
Reply by ●July 28, 20032003-07-28
The inputs to the A/D are AC coupled, so you will not see a square wave.
In fact you will not see any DC. Try a sine wave instead to see if the code is working. Joe -----Original Message----- From: Fahim Sheikh [mailto:] Sent: Monday, July 28, 2003 6:30 AM To: Subject: [c6x] data values read from Codec hi all, I have been accepting data via Mcbsp0 from AD535 codec, the problem i face is that that although the signal applied to A/D converter is square pulse, the received data stored in an array does not change its value, consequently the graph plotted shows a dc pulse, where as the input is ac. Any Ideas, i have varied the frequency, but ontained the same results. fahim _____ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: Send an email to To Post: Send an email to To Leave: Send an email to Archives: http://www.yahoogroups.com/group/c6x <http://www.yahoogroups.com/group/c6x> Other Groups: http://www.dsprelated.com <http://www.dsprelated.com ">http://docs.yahoo.com/info/terms/> . |