I am using McBSP 0 and 1 together with TIMER 0. The problem is that when
I initialize the timer, the clock signal from the McBSP dissapears. Any suggestions? Jacques |
|
McBSP clock and TIMER
Started by ●November 7, 2003
Reply by ●November 7, 20032003-11-07
--- Jacques Vorster <> wrote: > I am using McBSP 0 and 1 together with TIMER 0. The > problem is that when I > initialize the timer, the clock signal from the > McBSP dissapears. Any suggestions? one has nothing to do with the other - McBSP0, McBSP1 and Timer0 are all exclusive devices unless in your system you're using the timer to generate clock for McBSP - if not - there should be no problem... and that means - most likely you're code is messed up... next time tell us some more details - are you using DSP/BIOS? good luck... Wojciech Rewers __________________________________ |