Hi... I am using a 150 MHz C6711 DSP eval. board ... i am trying to interface a TI ADC with it, with sampling freq. of 52 MHz ... Does the DSP eval. board give out an external clock and if so @ what frequency ? ... i understand there is a pin on DSP with named ECLKOUT but in my case the pin is just not accessible as it is routed on the eval. board... is there any way to generate a clock @ frequencies between 25MHz to 52 MHz ?? I have to use a fast ADC and cant use the ones on the DSP board as they are too slow for my application ... if anyone can give their insight it will be greatly appreciated !! .. thanks ... -P |
|
C6711 external clock
Started by ●January 27, 2004
Reply by ●January 27, 20042004-01-27
Pckashikar- > I am using a 150 MHz C6711 DSP eval. board ... i am trying to > interface a TI ADC with it, with sampling freq. of 52 MHz ... Does > the DSP eval. board give out an external clock and if so @ what > frequency ? ... i understand there is a pin on DSP with named > ECLKOUT but in my case the pin is just not accessible as it is > routed on the eval. board... is there any way to generate a clock @ > frequencies between 25MHz to 52 MHz ?? I have to use a fast ADC and > cant use the ones on the DSP board as they are too slow for my > application ... if anyone can give their insight it will be greatly > appreciated !! .. ECLKOUT isn't routed to a test point? Every C6xxx board on the planet makes ECLKOUT available. What eval board is this? Doesn't sound like a DSK. -Jeff |