the board has got 16Mb of SDRAM, but when i try to increase stack size
(allotted from SDRAM) value through the dsp/bios main window, (mem settings
under the category of system)
i get a msg that the value can not exceed 0x10000 which is 65536 in decimal
i.e. 65k,
is there any solution to this?
Reply by Ganesh Vijayan●March 9, 20042004-03-09
Hi,
Why you require such a huge stack size ? Also
do you more memory free on SDRAM.
How much have you allocated for heap ? Which
other modules are placed on SDRAM.
Check your map file. That should be a good
indicator for the same.
Thanks and Regards,
Ganesh
----- Original Message -----
From: M. Danish Nisar
To: c...@yahoogroups.com
Sent: Tuesday, March 09, 2004 2:19 PM
Subject: [c6x] Wanting to increase stack size on DSK 6711
i am using DSP BIOS on a DSK 6711 board,
the board has got 16Mb of SDRAM, but when i try to increase stack size
(allotted from SDRAM) value through the dsp/bios main window, (mem settings
under the category of system)
i get a msg that the value can not exceed 0x10000 which is 65536 in decimal
i.e. 65k,
is there any solution to this?
Note: If you do a simple "reply" with your email client, only the author
of this message will receive your answer. You need to do a "reply all" if
you want your answer to be distributed to the entire group.
_____________________________________ About this discussion group:
