can somone explain to me, how i can access the dip switch on the TI's
tms320c6711 dsk board. or direct me to a place where i can get some sample
programs, that will be great.
[im only a starter, i have just been followin the rulph chassaing's book to
do
my programing so if anyone can tell me how i can modify that program to read
the DIP switch that will be great.]
thanks keeps
vai.
Reply by Mike Dunn●October 12, 20042004-10-12
Vai,
Look at the DSK help file. If you have hardware knowledge, there are
is info in the schematics.
Also, you can decipher the LED and dip switch info from the DSK GEL
file.
If you need more info, someone can assist you.
mikedunn
vaiy1 <v...@yahoo.co.nz>
wrote:
hi all,
can somone explain to me, how i
can access the dip switch on the TI's tms320c6711 dsk board. or
direct me to a place where i can get some sample programs, that will be
great.
[im only a starter, i have just been followin the rulph
chassaing's book to do my programing so if anyone can tell me how i
can modify that program to read the DIP switch that will be great.]
thanks keeps
vai. _____________________________________ Note: If you do a simple "reply"
with your email client, only the author of this message will receive your
answer. You need to do a "reply all" if you want your answer to be distributed
to the entire group.
_____________________________________ About
this discussion group: