Hello everyone,
I am using EDMA channels in TIC6713 and i am
using CPU triggered EDMA's and some GPIO triggered
EDMA. And there are sometimes when I use EDMA channels
with different TCC number, and hooked the callback
function hooked to this tcc number using
inthook(tccnum,function). Right now the the function
is called myedmaisr and then I come to know who has
completed the EDMA transfer by looking at the tcc
number and taking action. But these things can be done
using EDMA_intDispatcher() function. I have Interrupt
vector table where I had given this myedmaisr as
INT8(EDMA completion interrupt). But actually it
should have been like I plug this EDMA_intDispatcher
in the IVT and then hook the tcc numbers to the needed
callback functions and then it should call when EDMA
is completed.. But if i put this EDMA_intdispatcher
function in the IVT all other interrupts like INT7 and
stuff does not happen. Has anyone has an experience
with EDMA_intDispatcher()?. I am not using BIOS by the
way....
regards
Bala
__________________________________________
Yahoo! DSL Something to write home about.
Just $16.99/mo. or less.
dsl.yahoo.com
