DSPRelated.com
Forums

So strang when using VCP

Started by zyjatxjtu January 11, 2006
Hi, everybody!
Recently, I am using TMS320C6416 dsp to perform convolutional decoding
by its on-chip VCP. I wrote a simple code for simulation in CCS2.2
Device Simulation Mode, and got the correct decoded bits. When the same
code was downloaded through emulator, using breakpoints to check the
decoding result, I found the result was all zeros, whatever the
branchmetric values are. Is there anyone that met the same problemHow
to fix it?

Many thanks! Emails are welcome