Hi to all...
My SDRAM is now working...
Reason of working now is as follows.
I was implementing the Switching using the Digital Switch IC MT8980, that I had
tested earlier to the SDRAM on my Master Card (DSP Processor) earlier, whether
the switching was taking place but voice samples are not there in time slots,
whether small noise was there in the time slots.
Today on another same card, I ran the same SDRAM program, without the Digital
Switch IC,and the sample generator, and only with SDRAM mounted. It was running
fine without error. Actually the Sample Generator was producing the Noise in the
data Lines dut to that the fixed error was coming. I desoldered the Sample
generator JIG and working to remove the noise in JIG.
Thank you very much for keep answering my querries
Regards
