Hello, I'm trying to work on some audio related stuff for my class.Can anyone of you help me in configuring the interrupts for audio. To be specific can anyone help me with the source code just to read in a wave file and output the wavefile.Once the I/P and O/P part is done I shall develop my own algorithms for filtering etc.This I'm requesting you so I can get started.I've worked a bit with the IDK. I don't have any audio daughter card.I'll be using only the board. Thanks, Himachandra Chebrolu. |
|
Help with Audio port on TMS320C6711
Started by ●July 26, 2002
Reply by ●July 30, 20022002-07-30
Dear Sir, Please see 1.SPRA598, An Audio Example using DSP/BIOS. 2.SPRU301, TMS320C6000 CCS Tutorial --> chapter4, Testing Data From a File. And go to 'C:\ti\examples\dsk6711\bios\audio' Best Regards, TR. --- himachebrolu <> wrote: > Hello, > I'm trying to work on some audio related stuff for > my class.Can > anyone of you help me in configuring the interrupts > for audio. > To be specific can anyone help me with the source > code just to read > in a wave file and output the wavefile.Once the I/P > and O/P part is > done I shall develop my own algorithms for filtering > etc.This I'm > requesting you so I can get started.I've worked a > bit with the IDK. > I don't have any audio daughter card.I'll be using > only the board. > Thanks, > Himachandra Chebrolu. > > _____________________________________ > Note: If you do a simple "reply" with your email > client, only the author of this message will receive > your answer. You need to do a "reply all" if you > want your answer to be distributed to the entire > group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > To Post: Send an email to > > To Leave: Send an email to > Archives: http://www.yahoogroups.com/group/c6x > > Other Groups: http://www.dsprelated.com > ">http://docs.yahoo.com/info/terms/ __________________________________________________ |
Reply by ●July 30, 20022002-07-30
DSPers, If we load the program to TI's TMS320C6X chip, then shut down the power supply, afterthat reconnect the power. Does anyone know that : 1. Is the code still there ? 2. Do we have to buy XDS510(emulator) or something like that to burn it ? Thanks In Advance, TR. |
|
Reply by ●July 31, 20022002-07-31
> DSPers, > If we load the program to TI's TMS320C6X chip, then >shut down the power supply, afterthat reconnect the >power. Does anyone know that : >1. Is the code still there ? Unlikely - it's in SRAM. Of course, you might get lucky on a *short* power cycle.... >2. Do we have to buy XDS510(emulator) or something >like that to burn it ? There is no non-volatile storage, you need to provide external flash devices and then program them.. Which is also a challenge :-) HTH! Martin -- Martin Thompson BEng(Hons) CEng MIEE TRW Conekt Stratford Road, Solihull, B90 4GW. UK Tel: +44 (0)121-627-3569 - |