Re: Help on compilation errors during project through TMS320C6713 DSK + RTDX + CCS

Gopal-

> I am working with CCS on TMS320C6713 DSK Kit. I want to use RTDX for
> interfacing PC Host and Target device through MatLab .
>
> Prob : " MATLAB-DSK Interface Using RTDX, with MATLAB for
> FFT and Plotting " ..
>
> All program files , library file and all supporting files are
> included inti program project.
>
> But during compilation, one error has occured ...shown below ..

The _c_int00 entry-point warning message is not important. For the link errors, my
guess is that you are missing the rts67xx.lib file. Check this link:

http://www.dsprelated.com/groups/c6x/show/7831.php

Note the .lib file might not be named exactly that (may have similar name), so you
should go carefully through your MATLAB-TI documentation.

-Jeff

> *************************
> "C:\CCStudio_v3.1\C6000\cgtools\bin\cl6x" -@"Debug.lkf"
>
> >> warning: entry point symbol _c_int00 undefined
>
> undefined first referenced
> symbol in file
> --------- ----------------
>
> _IRQ_enable C:\CCStudio_v3.1\MyProjects\rtdx_matlabFFT\Debug\c6713dskinit.obj
> _DSK6713_AIC23_codecdatahandle C:\CCStudio_v3.1\MyProjects\rtdx_matlabFFT\Debug\c6713dskinit.obj
> _DSK6713_AIC23_openCodec C:\CCStudio_v3.1\MyProjects\rtdx_matlabFFT\Debug\c6713dskinit.obj
> _c_int00 C:\CCStudio_v3.1\MyProjects\rtdx_matlabFFT\Debug\intvecs.obj
> __strasg C:\CCStudio_v3.1\MyProjects\rtdx_matlabFFT\Debug\rtdx_matlabFFT.obj
> _puts C:\CCStudio_v3.1\MyProjects\rtdx_matlabFFT\Debug\rtdx_matlabFFT.obj
> __auto_init C:\CCStudio_v3.1\C6000\rtdx\lib\rtdx.lib
> _memcpy C:\CCStudio_v3.1\C6000\rtdx\lib\rtdx.lib
> _atexit C:\CCStudio_v3.1\C6000\rtdx\lib\rtdx.lib
>
> >> error: symbol referencing errors - './Debug/rtdx_matlabFFT.out' not built
>
> >> Compilation failure
>
> Build Complete,
> 2 Errors, 1 Warnings, 0 Remarks.
>
> **************
> So, friends, if you know this problem solution, please don't forget to give me the solution ...
>
> wish your cooperarion ..
>
> Regards ..
> Gopal Sarkar Start a New Thread