Forums

Sourcefile dev6x.src wanted !!!

Started by Unknown March 1, 2001
My problem: I want to emulate an UART by means of the McBSP of a
TMS320C6211 DSK. The necessary source code for the program is
described in the TI Application Report SPRA633. There are some header
files from the TMS320C6x Pheripheral Support Libary needed, but the
Lib-files of my current 1.23 CCS differ substantially from those used
in the TI sample code, so I've got many compiling errors. In my old
1.05 version there are neither the source code of the lib, nor the
binary files.
What I need is a old version of the TMS329C6x Peripheral Support
Libary as described in the SPRU273B, but the TI support cant help me.
Does anyone know where I can get it or can tell me a ohter way to
connect the McBSP of the board to the RS232-Port of a PC ?

Thanks

Werner



I don't know what version of the Peripheral Support Library is included
with the 1.23 CCS set up but you can ftp a version updated in July of 1998
on the TI website. If TI support said they can't help I rather suspect this
won't help either but here is the html just in case. Good Luck. -Devin

http://www-k.ext.ti.com/sc/technical_support/tools/dsp/ftp/c62x.htm

----- Original Message -----
From: <>
To: <>
Sent: Thursday, March 01, 2001 1:23 AM
Subject: [code-comp] Sourcefile dev6x.src wanted !!! > My problem: I want to emulate an UART by means of the McBSP of a
> TMS320C6211 DSK. The necessary source code for the program is
> described in the TI Application Report SPRA633. There are some header
> files from the TMS320C6x Pheripheral Support Libary needed, but the
> Lib-files of my current 1.23 CCS differ substantially from those used
> in the TI sample code, so I've got many compiling errors. In my old
> 1.05 version there are neither the source code of the lib, nor the
> binary files.
> What I need is a old version of the TMS329C6x Peripheral Support
> Libary as described in the SPRU273B, but the TI support cant help me.
> Does anyone know where I can get it or can tell me a ohter way to
> connect the McBSP of the board to the RS232-Port of a PC ?
>
> Thanks
>
> Werner >
> _____________________________________
> Note: If you do a simple "reply" with your email client, only the author
of this message will receive your answer. You need to do a "reply all" if
you want your answer to be distributed to the entire group.
>
> _____________________________________
> About this discussion group:
>
> To Join:
>
> To Post:
>
> To Leave:
>
> Archives: http://www.egroups.com/group/code-comp
>
> More Groups: http://www.dsprelated.com > ">http://docs.yahoo.com/info/terms/ >