Is there a tool which allowed to command line tool which allowed to load program into processor memory? Does one of AD tools in VisualDSP packet do this? JP
loading program to ADSP-21160 memory
Started by ●January 30, 2004
Reply by ●January 30, 20042004-01-30
/ smart ass answer on Yes. / smart ass answer off Seriously, you're going to have provide more information to get a useful answer, such as how you are connected to the DSP? A jtag emulator? PCI bus? USB? What OS are you running on the machine where you want the command line tool? etc ... ------ Ron Huizen BittWare "Jacek" <jacek@jacek.pl> wrote in message news:401a46ad$1@newspilot.put.poznan.pl...> Is there a tool which allowed to command line tool which allowed to load > program into processor memory? Does one of AD tools in VisualDSP packet do > this? > > JP > >
Reply by ●January 30, 20042004-01-30
Jacek wrote:> Is there a tool which allowed to command line tool which allowed to load > program into processor memory? Does one of AD tools in VisualDSP packet do > this?You have under-specified the problem. It largely depends on the type of host on which you're running the command line (PC? Mac? SBC?), how it's connected to the DSP (PCI? ISA? JTAG?) and often, on the OS it's running (MS? Linux? OSX? Something else?) The DSP card vendor most likely has a solution. -- Jim Thomas Principal Applications Engineer Bittware, Inc jthomas@bittware.com http://www.bittware.com (703) 779-7770 I thought I was wrong once, but I was mistaken.