Hi all: Since AC'97 codec (such as ALC100, ALC210 from realtek) is much cheaper than AD73322 for a stereo project, I'm thinking how to connect AC'97 codec to ADSP-2185 DSP. But the serial ports of ADSP-218x is not so flexible as mcbsp of TI's, it seems very hard for it to connect to AC'97 codec. Is there any references, examples to do this job? Thanks.
How to connect AC'97 codec to ADSP-218X?
Started by ●September 4, 2004
Reply by ●September 12, 20042004-09-12
"qhe" <qhe@nospam.tsinghua.org.cn> wrote in news:chdsa6$1l6q$1@mail.cn99.com:> Hi all: > > Since AC'97 codec (such as ALC100, ALC210 from realtek) is much > cheaper than AD73322 for a stereo project, I'm thinking how to connect > AC'97 codec to ADSP-2185 DSP. But the serial ports of ADSP-218x is not > so flexible as mcbsp of TI's, it seems very hard for it to connect to > AC'97 codec. > > Is there any references, examples to do this job? > > Thanks. > > >It is a little tricky to interface an AC-97 to most DSPs including the 2185. We use an AC'97 codec with our DSP-8300 (ADSP-2186 based) module. You might find the module useful. We also will license the code for a one time charge. Check out the module on our website and email us if you are interested. -- Al Clark Danville Signal Processing, Inc. -------------------------------------------------------------------- Purveyors of Fine DSP Hardware and other Cool Stuff Available at http://www.danvillesignal.com