i m using matlab 6.5, and want to simulate through simulink. i want to take e:g 54 bits and then break it into 9-bit blocks, each 9-bit block must go through an encoding process one after another.second block must enter into the process after the first has leaved the process. i m using the " signal from workspace" block to take the input.i have designed the encoder, but it takes only 9-bits, it cannot accept the regular bit stream.and after taking input, the block is passed through the S- function blocks. is there anyway out?.is there any problem with the simulation parameters. are the que, stack or memory blocks enough to solve the problem.and what must i do and how if anyone can tell the solution in detail regards omer |
working with block-based data
Started by ●July 27, 2003