hi, did any one implement rayleigh fading using a 3 stage model containing 1.jakes filter 2.Sinc Interpolator 3.Liner Interpolator if not plz send me the doc related to implementation..plz its urgent regards naga |
urgent ::rayleigh fading using jakes model
Started by ●March 4, 2005
Reply by ●March 4, 20052005-03-04
Hi there, the topics you ask for are covered in most standard text books...here is a link to an interesting article which covers the topics... http://rfdesign.com/ar/407rfdf2x.pdf In case you are interested in matlab implementations, you should just google around or look up at matlab central...You will easily find a reference code to tweak around to make it suitable for the purpose which seems to be fast fading interpreting from the stages you ask for... |
Reply by ●March 7, 20052005-03-07
hi , i could find out the way to calculate the channel coefficients of rayleigh channel using jakes model but it required >1000 no to get good response. if fdT ie::cut off frequency of filter is small it needs too high no of coefficients to implement using FIR.is there any other way i mean by changing any other parameter in jakes equation.Remember it has to be implemented using FIR only. regards naga On Fri, 4 Mar 2005 10:40:35 -0800 (PST), Nrip Nihalani <> wrote: > Hi there, > > the topics you ask for are covered in most standard > text books...here is a link to an interesting article > which covers the topics... > > http://rfdesign.com/ar/407rfdf2x.pdf > > In case you are interested in matlab implementations, > you should just google around or look up at matlab > central...You will easily find a reference code to > tweak around to make it suitable for the purpose which > seems to be fast fading interpreting from the stages > you ask for... > __________________________________________________ > > |