To whomever Why is this issue and "new dll" only of concern to Art and not being posted as a general update?. Let the end user decide if this is needed. We have not installed 5.03 because of the issues that are being raised and if problems are being fixed, why isn't the whole user community be advised of the fixes? Drew Roberts Nordson Corp. -----Original Message----- From: Art Johnson To: ; Sent: 1/9/2003 4:17 PM Subject: RE: [motoroladsp] Re: MSL Libraries with CodeWarrior version 5.0.3 John, Thanks very much for this fix, I will install it right away. The new cc_m56800.dll that you sent me has indeed fixed the other problem we were having. I would like to extend my sincere thanks to you, and everyone else at Metrowerks who was involved in fixing this problem. Your very fast response and bug fix has greatly helped us in our efforts to meet several critical deadlines, and has also greatly pleased senior management here. We are also looking forward to being a Beta Test Site for the next major release of CodeWarrior for Motorola DSP56800, and working together with you on future improvements and bug fixes. Please pass on my sincere thanks to all of your team who were involved in this effort. Thank you. Sincerely, Art Johnson Senior Systems Analyst PMC Prime Mover Controls Inc. 3600 Gilmore Way Burnaby, B.C., Canada V5G 4R8 Phone: 604 433-4644 FAX: 604 433-5570 Email: http://www.pmc-controls.com -----Original Message----- From: jdw_atx <> [mailto:] Sent: Thursday, January 09, 2003 10:36 AM To: Subject: [motoroladsp] Re: MSL Libraries with CodeWarrior version 5.0.3 Art, I have sent you a separate email that I think should address this issue. Since I believe this issue to be specific to your setup, I am not going to post the solution on the newsgroup. However, I want everyone to know that there are no issues with the R5.0.3 MSL libraries. Regards, John --- In , "Art Johnson" <art@p...> wrote: > Hello, I'm getting some warning messages when I build our projects using CodeWarrior version 5.0.3. These warning messages did not exist under CodeWarrior version 5.0.2. > > As you are probably aware of by now, when you get the latest CodeWarrior patch from Metrowerks, you must recompile all of the MSL libraries you are using. (I was unaware of this requirement, as this is the first IDE I have ever used where patches did not include recompiled libraries, and this may have been responsible for some of the problems we have been seeing.) > > The warning messages I get are the following: > > Symbol FIsInf multiply defined in MSL C 56800.Lib(float_dsp.o ) and MSL C 56800.Lib(float.o ) > Ignoring the definition in MSL C 56800.Lib(float_dsp.o ) > > Symbol FIsNan multiply defined in MSL C 56800.Lib(float_dsp.o ) and MSL C 56800.Lib(float.o ) > Ignoring the definition in MSL C 56800.Lib(float_dsp.o ) > > Does anybody else get these warning messages, and is there any way to eliminate them? I realize that these warnings are unlikely to cause us problems, but I just find it extremely annoying to get any warnings at all when I compile our projects. > > Thanks, everyone, in advance for your help. > > Regards, > > Art Johnson > Senior Systems Analyst > PMC Prime Mover Controls Inc. > 3600 Gilmore Way > Burnaby, B.C., Canada > V5G 4R8 > Phone: 604 433-4644 > FAX: 604 433-5570 > Email: art@p... > http://www.pmc-controls.com _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: To Post: To Leave: Archives: http://www.yahoogroups.com/group/motoroladsp More Groups: http://www.dsprelated.com/groups.php3 ">http://docs.yahoo.com/info/terms/ _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: To Post: To Leave: Archives: http://www.yahoogroups.com/group/motoroladsp More Groups: http://www.dsprelated.com/groups.php3 ">http://docs.yahoo.com/info/terms/ |
|
RE: Re: MSL Libraries with CodeWarrior version 5.0. 3
Started by ●January 10, 2003
Reply by ●January 13, 20032003-01-13
Roberts, Drew wrote: > To whomever > > Why is this issue and "new dll" only of concern to Art and not being posted > as a general update?. Because it has not been tested, it takes time for a fix to be validated would you have us post it only to find it affects something else. Art can test it on his own code to see if it causes any problems there but we need to test it much further than one program. >Let the end user decide if this is needed. We have > not installed 5.03 because of the issues that are being raised and if > problems are being fixed, why isn't the whole user community be advised of > the fixes? What do you mean? You do know about it, you are asking about it :) Frankly I think the compiler bug is pretty unique, it slipped by because we had no validation to test the exact circumstances in which it happens (we do now thanks to Art). As for the MSL issue that appears to be a problem with Arts setup (access paths order / headers /libraries) getting out of sync. I think we have gotten this straightened out and Art is testing that too we should know soon on that. Ron > Drew Roberts > Nordson Corp. > > -----Original Message----- > From: Art Johnson > To: ; > Sent: 1/9/2003 4:17 PM > Subject: RE: [motoroladsp] Re: MSL Libraries with CodeWarrior version 5.0.3 > > John, > > Thanks very much for this fix, I will install it right away. > > The new cc_m56800.dll that you sent me has indeed fixed the other > problem we were having. I would like to extend my sincere thanks to > you, and everyone else at Metrowerks who was involved in fixing this > problem. Your very fast response and bug fix has greatly helped us in > our efforts to meet several critical deadlines, and has also greatly > pleased senior management here. We are also looking forward to being a > Beta Test Site for the next major release of CodeWarrior for Motorola > DSP56800, and working together with you on future improvements and bug > fixes. Please pass on my sincere thanks to all of your team who were > involved in this effort. Thank you. > > Sincerely, > > Art Johnson > Senior Systems Analyst > PMC Prime Mover Controls Inc. > 3600 Gilmore Way > Burnaby, B.C., Canada > V5G 4R8 > Phone: 604 433-4644 > FAX: 604 433-5570 > Email: > http://www.pmc-controls.com > > -----Original Message----- > From: jdw_atx <> [mailto:] > Sent: Thursday, January 09, 2003 10:36 AM > To: > Subject: [motoroladsp] Re: MSL Libraries with CodeWarrior version 5.0.3 > Art, > > I have sent you a separate email that I think should address this > issue. Since I believe this issue to be specific to your setup, I am > not going to post the solution on the newsgroup. However, I want > everyone to know that there are no issues with the R5.0.3 MSL > libraries. > > Regards, > John > > --- In , "Art Johnson" <art@p...> wrote: >> Hello, I'm getting some warning messages when I build our projects > using CodeWarrior version 5.0.3. These warning messages did not > exist under CodeWarrior version 5.0.2. >> >> As you are probably aware of by now, when you get the latest > CodeWarrior patch from Metrowerks, you must recompile all of the MSL > libraries you are using. (I was unaware of this requirement, as this > is the first IDE I have ever used where patches did not include > recompiled libraries, and this may have been responsible for some of > the problems we have been seeing.) >> >> The warning messages I get are the following: >> >> Symbol FIsInf multiply defined in MSL C 56800.Lib(float_dsp.o ) > and MSL C 56800.Lib(float.o ) >> Ignoring the definition in MSL C 56800.Lib(float_dsp.o ) >> >> Symbol FIsNan multiply defined in MSL C 56800.Lib(float_dsp.o ) > and MSL C 56800.Lib(float.o ) >> Ignoring the definition in MSL C 56800.Lib(float_dsp.o ) >> >> Does anybody else get these warning messages, and is there any way > to eliminate them? I realize that these warnings are unlikely to > cause us problems, but I just find it extremely annoying to get any > warnings at all when I compile our projects. >> >> Thanks, everyone, in advance for your help. >> >> Regards, >> >> Art Johnson >> Senior Systems Analyst >> PMC Prime Mover Controls Inc. >> 3600 Gilmore Way >> Burnaby, B.C., Canada >> V5G 4R8 >> Phone: 604 433-4644 >> FAX: 604 433-5570 >> Email: art@p... >> http://www.pmc-controls.com > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author > of this message will receive your answer. You need to do a "reply all" > if you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: > > To Post: > > To Leave: > > Archives: http://www.yahoogroups.com/group/motoroladsp > > More Groups: http://www.dsprelated.com/groups.php3 > ">http://docs.yahoo.com/info/terms/ > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author > of this message will receive your answer. You need to do a "reply all" > if you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: > > To Post: > > To Leave: > > Archives: http://www.yahoogroups.com/group/motoroladsp > > More Groups: http://www.dsprelated.com/groups.php3 > ">http://docs.yahoo.com/info/terms/ > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author of > this message will receive your answer. You need to do a "reply all" if you > want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: > > To Post: > > To Leave: > > Archives: http://www.yahoogroups.com/group/motoroladsp > > More Groups: http://www.dsprelated.com/groups.php3 > ">http://docs.yahoo.com/info/terms/ -- Free Programming Courses at CodeWarrior U <http://www.codewarrioru.com> Metrowerks, maker of CodeWarrior - "Software Starts Here" Ron Liechty - - http://www.metrowerks.com |