|
Does anyone have any code that would SEND a digital clock from four of the dedicated GPIO's on the DSP56F827EVM. If not then could someone give me a basic outline as to how i could program this. I require clocks at (near 12.288MHz), 48KHz, 3.072MHz and 10KHz and I am using CW version5.0. Thank you (as an extra I also want to RECEIVE clocks of a similar nature using another 4 of the dedicated GPIOs) |
sending/ receiving clocks via dedicated GPIOs: DSP56f827
Started by ●June 4, 2003
