Hi, Has anyone ever used BoxView Debugger from Domain Technologies? What are the advances or improvements does Boxview have over Debug-56K? Does anyone know any other debugger for Motorola DSP? Thanks in advance. Henry. |
|
Boxview debugger
Started by ●December 29, 2000
Reply by ●January 2, 20012001-01-02
As far as I know the BoxView Debugger supports remote debugging by TCP/IP protocol as well as debugging connected to Mot's OnCE port directly. I have tried this debugging tool several years ago but stuck to Domain Technologies' Debug-56k since I have got used to that tool. A year or so later Domain technologies bought the company (I think their name was SoftBox) and replaced their own Debug-56K debugger by the BoxView toolchain (The price is also the same as it was for the Debug-56k box). Today you can buy a simple 'Wiggler' adaptor called DSPCOMMPARALLEL for $150 directly from a Motorola distributor which is to be connected to the PC's parallel printer port and download their debugging software from their website http://www1.motorola-dsp.com/software/software.taf?type=releases (The CD-ROM was _not_ included in the box I purchased). I have tried this debugging tool with the EVM56303DSP evaluation board and it worked well. The same software can be used with a PCI-card based ($2000) or ethernet debugger($3000 or so, but even Motorola does not recommend this tool). I hope I could help you a little bit... Christian > Hi, > > Has anyone ever used BoxView Debugger from Domain Technologies? > What are the advances or improvements does Boxview have over > Debug-56K? Does anyone know any other debugger for Motorola DSP? > Thanks in advance. > > Henry. -- Sent through GMX FreeMail - http://www.gmx.net |
|
Reply by ●January 3, 20012001-01-03
Christian- We have used a Wiggler for some MPC8240 work. Very slow and we find that a traditional PCI card is still preferable, but for some basic stuff it's Ok. Do you know if there is a Wiggler available for Texas Inst. C54xx processors? Jeff Brower Signalogic On Tue, 2 Jan 2001, Christian Langen <> wrote: >As far as I know the BoxView Debugger supports remote debugging by TCP/IP >protocol as well as debugging connected to Mot's OnCE port directly. I >have tried this debugging tool several years ago but stuck to Domain >Technologies' Debug-56k since I have got used to that tool. A year or so >later Domain technologies bought the company (I think their name was >SoftBox) and replaced their own Debug-56K debugger by the BoxView >toolchain (The price is also the same as it was for the Debug-56k box). >Today you can buy a simple 'Wiggler' adaptor called DSPCOMMPARALLEL for >$150 directly from a Motorola distributor which is to be connected to the >PC's parallel printer port and download their debugging software from >their >website > >http://www1.motorola-dsp.com/software/software.taf?type=releases > >(The CD-ROM was _not_ included in the box I purchased). I have tried this >debugging tool with the EVM56303DSP evaluation board and it worked well. >The same software can be used with a PCI-card based ($2000) or ethernet >debugger($3000 or so, but even Motorola does not recommend this tool). > >I hope I could help you a little bit... > >Christian >> Hi, >> >> Has anyone ever used BoxView Debugger from Domain Technologies? >> What are the advances or improvements does Boxview have over >> Debug-56K? Does anyone know any other debugger for Motorola DSP? >> Thanks in advance. >> >> Henry. |